WD20EZRX slow

[maxisvk]

hello
i hava a WD20EZRX-00DC0B0, try first with rapidspar, identify correct but freeze and cannot read data.
with WDMARVELL 4.0.2 i try read rom and modules then try slow fix but end with this error on write module 32:

Code:

02/09/2019 15.42.28: Reading modules...
02/09/2019 15.42.47: Error reading module ID21, state - 51AD
02/09/2019 15.43.02: Error reading module ID6F, state - 51AD
02/09/2019 15.43.09: Error reading module IDB2, state - 51AD
02/09/2019 15.43.27: Error reading module IDE1, state - 51AD
02/09/2019 15.44.26: Error reading module ID4002, state - 51AD
02/09/2019 15.44.29: Successfully read 427 modules
02/09/2019 15.44.39: Region map successfully changed
02/09/2019 15.44.39: Region map successfully changed
02/09/2019 15.44.46: Overlays successfully loaded to RAM
02/09/2019 15.44.47: Region map successfully restored
02/09/2019 15.44.47: Region map successfully restored
02/09/2019 15.44.48: Error writing module 32, state -DISK_SERVO_WRT_FLT_OFFTRACK_ERROR
02/09/2019 15.44.48: Error clearing the RELO-List...


any advice how to proceed.

[Amarbir[CDR-Labs]]

Hi,
Looks like a bad head to me

[pcimage]

Do a test write on an unimportant module to see if heads can write to SA.

If that works then likely the SA is damaged in the area where mod32 is residing.

[maxisvk]

ok, swap head solve problem.
thanks

[Amarbir[CDR-Labs]]

ok, swap head solve problem.
thanks

Hi ,
See i told you -> https://forum.hddguru.com/viewtopic.php ... 46#p274446 .Typical fault that is due to heads

[pcimage]

ok, swap head solve problem.
thanks

Yes, original heads couldn’t write.