Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
February 12th, 2020, 7:40
Hello friends, good day. Does anyone here have a ST2000DM006-2DM164 CC46 fw version 3D.rpm loader file to share, please? HDDSurgery doesn't have it.
Thank you so much for anyone that could share.
February 17th, 2020, 12:24
No one with this drive? I've been searching every corner, even to buy one with CC46 fw version. Don't know if it were made so little drawing, but I only find CC26.
February 17th, 2020, 13:46
If you want Loader this is it. but its from ST1000DM003-1CH162-CC46
- Attachments
-
- LDR.rar
- (675.83 KiB) Downloaded 394 times
February 17th, 2020, 14:32
siamak5561, Thank you.. I'm looking for 3D.rpm file. I've tried to load other CC46 3D files on MRT's virtual start, but it keeps giving me
"OverlayCompatibilityCheck failed
Unable to load Diag Cmd Processor Overlay"
I did try to use CC26 LDR with CC26 3D.rpm, but I get an error while updating microcode. Don't know what else I can do without a 3D.rpm file from de same model and same firmware version.
But thank you again.
February 17th, 2020, 14:34
Powered by phpBB © phpBB Group.