Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 8th, 2020, 10:47
Hello guys, good day.
Could someone share the 3D module file for ST3000DM003 2AE16L-568 Fw 001?
Thank you so much for any help.
June 8th, 2020, 10:53
This is a V9 - Desktop HDD Drive.
June 10th, 2020, 15:00
No one?
June 10th, 2020, 15:40
https://firmware.hddsurgery.com/index.p ... &family=V9By F/W of type:
Package Version.......... : V9A2010.CCD7.VAB00G.0001
Pkg CFW Ver.............. : V9A2010.CCD7.01098643.00480557
ID 3D = FID 20D = CFW
June 10th, 2020, 16:52
Tomset, Thank you for you answer.
Sorry if this question sounds dumb, but I didn't find any ST3000DM003 on hddsurgery V9 family list. MRT recognizes it as V9...
If I try a 3D module for virtual start from other model, it will give me an overlay compatibility error, right?
Thank you for your help.
June 10th, 2020, 17:35
parmindo,
The same version of CFW can be on any other V9 drive, Any volume and model, the main family.
When analyzing the ROM, you can find out which version CFW.
I do not have resources from V9 yet.
June 11th, 2020, 12:03
Tomset, Thanks again friend, this elucidate some of my doubts.
But now I'm stuck with another little thing: When I tried to virtual start this drive with a Lombard ST3000DM003 3D Mod I've got overlay compatibility error. They are not from the same family, and now I understood why it is not working.
But when I try to do the same with other model, from V9 Desktop HDD family, I get nothing. It simply doesn't work and I don't get F3> again.
Don't know why but it seems to me that ST3000DM003 V9 family is a little rare to find.
Powered by phpBB © phpBB Group.