Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
Maestro
 Post subject: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 16th, 2020, 3:12 
Offline

Joined: August 22nd, 2007, 3:55
Posts: 45
Hello everyone,

I have this WD drive with model WD4003FRYZ-01F0DB0 and original pcb is burned.

When i install donour pcb it gives model, serial, firm and capacity on pc3k but when i enter universal utility it gives error that drive is locked.

Can someone help me with issue?

Thank you all in advance

Regards

Maestro.
Top
 Profile  
 
digisupport
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 16th, 2020, 3:49 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 581
Location: Kolding | Denmark
Sorry to ask, have you remembered to transfer ROM or firmware from burned PCB to donor ?
Your drive is most likely a Hitachi in WD disguise.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
Maestro
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 16th, 2020, 4:54 
Offline

Joined: August 22nd, 2007, 3:55
Posts: 45
This is a photo of the pcb.

Can you point me where is rom chip or which chip to transfer?

Thanx

Maestro


Attachments:
wd4003fryz pcb.JPG
wd4003fryz pcb.JPG [ 706.97 KiB | Viewed 10944 times ]
Top
 Profile  
 
michael chiklis
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 16th, 2020, 8:45 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
Yep, that's Hitachi!

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ
Top
 Profile  
 
fzabkar
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 16th, 2020, 16:28 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 14945
Location: Australia
Did you check the fuses and TVS diodes?

There appear to be two ROMs located at the top left corner of the MCU in your photo.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
pcimage
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 17th, 2020, 14:32 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7855
Location: UK
Maestro wrote:
Hello everyone,

I have this WD drive with model WD4003FRYZ-01F0DB0 and original pcb is burned.

When i install donour pcb it gives model, serial, firm and capacity on pc3k but when i enter universal utility it gives error that drive is locked.

Can someone help me with issue?

Thank you all in advance

Regards

Maestro.



I bet it gives you the S/N of the donor and not the one on your bad drives label?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
pcimage
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: July 17th, 2020, 14:33 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7855
Location: UK
digisupport wrote:
Sorry to ask, have you remembered to transfer ROM or firmware from burned PCB to donor ?
Your drive is most likely a Hitachi in WD disguise.


Bingo! :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
atamoro
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: October 29th, 2021, 13:23 
Offline

Joined: December 20th, 2017, 6:58
Posts: 1
Location: italy
Hi all,

same problem here:


need to know if this is the chip to swap on new pcb??


Attachments:
ff2.jpg
ff2.jpg [ 344.62 KiB | Viewed 6866 times ]
Top
 Profile  
 
fzabkar
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: October 30th, 2021, 14:25 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 14945
Location: Australia
atamoro wrote:
Hi all,

same problem here:


need to know if this is the chip to swap on new pcb??

no

_________________
A backup a day keeps DR away.
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: WD4003FRYZ-01F0DB0 PROBLEM WITH PCB
PostPosted: October 31st, 2021, 19:06 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 479
Location: Turkey
Yes I know it. recovered data before.
PCB no 0B36131

I have transfered both chips. And worked.
That chips smaller than common Rom chips. be carefull
Attachment:
ScreenShot_20210828233849.jpeg
ScreenShot_20210828233849.jpeg [ 43.2 KiB | Viewed 6666 times ]

chek this
https://www.data-medics.com/forum/threa ... -pcb.4027/

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 80 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group