MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Previous topic | Next topic 
Author Message
sosrecup
 Post subject: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 29th, 2020, 9:14 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Hello,

I need ressources for WD Palmer WD10SPZX-24Z10T0.

I tried fessources from hddguru sharinf files and hddsurgery database, unfortunately, it shows me

Permanent ovl (11) data uploading Device Error Detected: "VSC ERR OFF TOO LARGE"

The drive is locked. I used an unlock PCB to unlock it. it was recgnized and could read SA modules. Then by mistake I erased module 32. now drive run in kernel mode.

Thank yo in advance for your help.

Kind regrds
Top
 Profile  
 
sosrecup
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 30th, 2020, 12:37 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Anyone who have this ressource is willing to help :roll:
Top
 Profile  
 
fzabkar
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 30th, 2020, 21:56 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16963
Location: Australia
Can't you use the 22Z10T0 resources at hddsurgery.com?

https://firmware.hddsurgery.com/index.php?manufacturer=Western%20Digital&family=Palmer

_________________
A backup a day keeps DR away.
Top
 Profile  
 
sosrecup
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 1:31 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Dear fzabkar,

Thank you for your help.

I tried all the ressources of hddsurgery database. they are not compatible (with PC3000 confirmation)

It says module 11 it too large.
Top
 Profile  
 
saltwater
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 3:16 
Offline
User avatar

Joined: November 3rd, 2013, 13:04
Posts: 330
Location: Hungary
What microcode OVLY 11 do you need?
Top
 Profile  
 
digisupport
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 4:06 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 627
Location: Kolding | Denmark
And why not use the drives own mod 11 from when you read SA modules ?

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
sosrecup
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 5:02 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Quote:
And why not use the drives own mod 11 from when you read SA modules ?


because I stopped the backup of SA (because it was very slow) and empty the module 32. :roll:
Top
 Profile  
 
sosrecup
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 5:07 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Quote:
What microcode OVLY 11 do you need?



Model: WD10SPZX-24Z10T0
FW: 01-01A01

Ideally, modules 01, 02, 11

Thank you for your help.
Top
 Profile  
 
saltwater
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 5:44 
Offline
User avatar

Joined: November 3rd, 2013, 13:04
Posts: 330
Location: Hungary
sosrecup wrote:
Quote:
What microcode OVLY 11 do you need?



Model: WD10SPZX-24Z10T0
FW: 01-01A01

Ideally, modules 01, 02, 11

Thank you for your help.



This is not enough. Please post fw microcode version.
Top
 Profile  
 
sosrecup
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 5:49 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Here the requested info:

Code:
ROM:
Read ROM................................ : Ok
ROM Data size........................... : 1024 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 161 862
SA regions address...................... : by default
Module 02 access........................ : Granted
ROM Modules:
ROM version............................. : 02.1AP
ROM F/W version......................... : 0002000T
Overlay F/W version..................... : 02.1AP
Servo F/W version....................... : 01.3C
Top
 Profile  
 
Mikippp
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 6:10 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
Code:
>ROM Modules:
>ROM version............................. : 02.1AP
>ROM F/W version......................... : 0002000P
>Overlay F/W version..................... : 02.1BP
>Servo F/W version....................... : 01.3C

Mikippp


Attachments:
11.zip [718.9 KiB]
Downloaded 622 times
Top
 Profile  
 
sosrecup
 Post subject: Re: Loader for WD Palmer WD10SPZX-24Z10T0
PostPosted: August 31st, 2020, 7:35 
Offline

Joined: September 7th, 2012, 16:37
Posts: 197
Thank you for your help Mikippp

Now, it shows this:

Code:
Cache ovl(10) data uploading............ : Ok
Permanent ovl (11) data uploading Device Error Detected: "HOST DEBUGSTOP OCCURRED"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 72 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group