Hi team
I have got a hynix m.2 SSD for data recovery. As per client it is not detected in systems.
I consulted one of my friend who was having ACELAB flash as well as rosolute . But he said ace flash tool does not support hynix and success ratio is very poor so he has sold device.
Since rosolute is purely chip off device its of no use as removal of BGA /monolithic chips is not so easy (client should be ready to pay higher charges)
Another issue as per him is encryption which he said very difficult to deal with.
What should I do now , what are other challenges for this case ?
Model no of SSD is -- SK Hynix SC401 SATA 256GB FW -90000121

what is the controller?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Northwind, SC401 uses a SHB7810AA MCU

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk

Need read via interface, I think chip-off is not possible for this model. We have some success with this controller.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices