Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Previous topic | Next topic 
Author Message
siamak5561
 Post subject: ST1000LM035-1RK172 Zero capacity
PostPosted: January 16th, 2021, 12:31 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
Hi I have this drive and have ID and with zero capacity, but not access to User area , and it seem sys file 28 is corrupted because I cant read it in anyway, any advice ?

Pewer On
Code:
Boot 0x80M
---Mrt UnLock---
LockCode:0xB3977E5A
LockKey:
Rst 0x80MSrv DETCR init 0x0000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
EDAC Value = 0000F01800000000
DOS:0 Scan Unit
Send Status: COMRESET seen
CSpd= 6Gbps
DSC



CTRL-X
Code:
ATA  40 Cmds
Ts(ms)     dT(ms)   Op Cnt  LBA
         0 99999999 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000

RW  48 Cmds
Ts(ms)     dT(ms)   xT(ms)  Type Option Mode  St EC       Info
         0 99999999        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
         0        0        0 00  000000 000000 0 00000000 SEEK RD USR LBA
      4675     4675        0 2F  000000 000000 1 00000080 SPN_UP NORMAL
      4720       45       10 34  000000 000000 1 00000080 TCC 0
      4730       10        8 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000000001 L 000000000005 BO 000000 BES 028D8E4.028E2E3.028D8E4
      4738        8        4 02  011201 000000 1 00000080 XFR RD SYS LBA B 00000000960E L 000000000001 BO 000000 BES 01EB000.01EBFFF.01EB000
      4742        4       10 02  028201 000000 1 00000080 XFR WR SYS LBA B 00000000960E L 000000000001 BO 000000 BES 01EB000.01EB1FF.01EB000
      4754       12        3 02  011201 000000 1 00000080 XFR RD SYS LBA B 0000000073D2 L 000000000002 BO 000000 BES 0225E00.02261FF.0225E00
      4757        3       11 02  811201 000000 1 00000080 XFR RD SYS LBA B 0000000073D6 L 000000000001 BO 000000 BES 0061928.0061B27.0061928
      4773       16       12 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000005781 L 000000000002 BO 000000 BES 042D640.042DA3F.042D640
      4786       13        4 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000004E0D L 000000000001 BO 000000 BES 01A6714.01A6913.01A6714
      4791        5       12 02  011201 000000 1 00000080 XFR RD SYS LBA B 0000000053EB L 000000000015 BO 000000 BES 0434840.043723F.0434840
      4807       16       11 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000009603 L 000000000001 BO 000000 BES 01EFE00.01EFFFF.01EFE00
      4818       11       45 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000005D33 L 000000000220 BO 000000 BES 01A6B20.01EAB1F.01A6B20
      4865       47        8 02  011201 000000 1 00000080 XFR RD SYS LBA B 0000000095FF L 000000000004 BO 000000 BES 042D640.062D63B.042D640
      4888       23       11 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000008215 L 000000000001 BO 000000 BES 00F643A.00F6639.00F643A
      4900       12        2 02  011201 000000 1 00000080 XFR RD SYS LBA B 00000000823B L 000000000002 BO 000000 BES 00F663A.00F6A39.00F663A
      4902        2        8 02  028201 000000 1 00000080 XFR WR SYS LBA B 000000008215 L 000000000001 BO 000000 BES 00F643A.00F6639.00F643A
      4911        9        6 02  011201 000000 1 00000080 XFR RD SYS LBA B 00000000A501 L 000000000002 BO 000000 BES 0250E00.02511FF.0250E00
      4917        6      352 02  011201 000000 2 44090082 XFR RD SYS LBA B 000000005783 L 0000000000ED BO 000000 BES 02A0C40.02BE63F.02A0C40
      5277      360     2743 02  011201 000000 2 44090082 XFR RD SYS LBA B 000000005783 L 000000000001 BO 000000 BES 02A0C40.02BE63F.02A0C40
      8029     2752      352 02  011201 000000 2 44090082 XFR RD SYS LBA B 0000000122A3 L 0000000000ED BO 000000 BES 02A0C40.02BE63F.02A0C40
      8389      360     2732 02  011201 000000 2 44090082 XFR RD SYS LBA B 0000000122A3 L 000000000001 BO 000000 BES 02A0C40.02BE63F.02A0C40
     11173     2784       75 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000007CCF L 000000000400 BO 000000 BES 00F86AD.01786AC.00F86AD
     11264       91       19 1B  011201 000000 1 00000080 DEBUG_CAPTURE
     11297       33        3 02  028201 000000 1 00000080 XFR WR SYS LBA B 000000009D81 L 000000000001 BO 000000 BES 00F74AD.00F76AC.00F74AD
     11300        3       13 02  011201 000000 1 00000080 XFR RD SYS LBA B 00000000A90C L 000000000050 BO 000000 BES 0227C00.0231BFF.0227C00
     11315       15       12 02  028201 000000 1 00000080 XFR WR SYS LBA B 000000007193 L 000000000001 BO 000000 BES 00F82AD.00F84AC.00F82AD
     11327       12        7 02  011201 000000 1 00000080 XFR RD SYS LBA B 000000019640 L 000000000001 BO 000000 BES 0254800.02549FF.0254800
     11334        7       13 02  011201 000000 1 00000080 XFR RD SYS LBA B 00000000AE5F L 000000000041 BO 000000 BES 0264A00.026CBFF.0264A00


Top
 Profile  
 
unknown
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: January 21st, 2021, 14:30 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
PM sent.
Top
 Profile  
 
hddguy
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: January 22nd, 2021, 7:59 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2983
I guess you already tried regen translator without backup of 28 or 35 since you have xx82 errors :?
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: January 23rd, 2021, 17:41 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
hddguy wrote:
I guess you already tried regen translator without backup of 28 or 35 since you have xx82 errors :?

No, I did not, And i have orig 35, but my problem is I cant get 28.
Top
 Profile  
 
pcimage
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: January 24th, 2021, 5:40 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
siamak5561 wrote:
hddguy wrote:
I guess you already tried regen translator without backup of 28 or 35 since you have xx82 errors :?

No, I did not, And i have orig 35, but my problem is I cant get 28.


Are both copies of 28 totally unreadable?

I don't know about MRT, but in PC3k there's an option to read by single sectors ignoring errors. So sometimes it's possible to patch together one good copy from the two.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: January 24th, 2021, 6:39 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
I dont think MRT have this option, but I should ask their support .
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 3rd, 2021, 12:43 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
Guys Im still have this issue, any help ?
Top
 Profile  
 
ddrecovery
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 3rd, 2021, 13:09 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
siamak5561 wrote:
Guys Im still have this issue, any help ?

If you cannot read sys28 with MRT then we cannot help magic it back.
You have a much better chance with PC3K as it can read by single sector and ignore the bad areas.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 3rd, 2021, 13:42 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
So if even by PC3K cant read sys 28 there is no chance to get Data ?
Top
 Profile  
 
Dananjaya
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 3rd, 2021, 13:56 
Offline

Joined: February 2nd, 2019, 1:21
Posts: 192
Location: Sri Lanka
Check your PM
Top
 Profile  
 
MindMergepk
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 3rd, 2021, 14:28 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
it can be solved even with MRT :idea:

_________________
Data Recovery Pakistan
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 4th, 2021, 3:55 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
MindMergepk wrote:
it can be solved even with MRT :idea:

How exactly?
Top
 Profile  
 
MindMergepk
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 4th, 2021, 7:07 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
you have to read SA via ABA option in MRT with ignore read error option.
with this you will get 28 sysfile with bad sector, which can be patched and write back .

_________________
Data Recovery Pakistan
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 6th, 2021, 13:29 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
You mean ABA mode automatically ignore error, or I have to change something in MRT? because I already Using ABA and gets error.
Top
 Profile  
 
siamak5561
 Post subject: Re: ST1000LM035-1RK172 Zero capacity
PostPosted: March 8th, 2021, 12:38 
Offline
User avatar

Joined: April 24th, 2018, 11:02
Posts: 252
Location: Iran
I have orig sys 35 , do you think if i use m0,6,3 maybe it can lead to read sys 28 ? and then restore orig sys 35?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group