Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

ST2000LM007 'clicks' and not detected by system

March 8th, 2021, 15:38

Seagate ST2000LM007 Mobile HDD 2TB with films connected via USB. Drive is clicking and not detectable by system.
Data recover is not interesting, because it is connected to my parents Smart TV.
What is happened to it? Can it be fixed?
Code:
Boot 0x80M
Low Current Spin
FAIL  Servo Op=0100 Resp=0003

0100 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 1480 0000 0C21 0380 0008 0000 0000 0000 0E54 0000 0000 0000 0000 0000 0000 E600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0004 Loop=007F

Motor started
             Heads loaded
FAIL  Servo Op=0095 Resp=0007

0095 6D96 0004 7FFF 7FFF 7FFF 0000 0003 0000 0000 8000 0000 FFFF 0000 0000 0000 0000 0000 0000 0000 0000 61B0 43D9 A000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 0000 0000 0000 C77A 01F8 FFBA 0000 0001 0000 0000 0000 0000 0000 E600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF Loop=201F

FAIL  Servo Op=000E Resp=000B

000E 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0BA2 0011 0000 0000 0000 C77A 01F8 FFBA 0000 0001 0000 0000 0000 0000 0000 E600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 201F
                           HPSR
FAIL  Servo Op=0095 Resp=0007

0095 6D96 0004 7FFF 7FFF 7FFF 0000 0003 0000 0000 8000 0000 FFFF 0000 0000 0000 0000 0000 0000 0000 0000 61B0 43D9 A000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0001 0001 0000 0000 0000 C77A 01F8 FFBA 0000 0001 0000 0000 0000 0000 0000 E600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF Loop=2020

FAIL  Servo Op=000E Resp=000B

000E 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0BA2 0011 0000 0000 0000 C77A 01F8 FFBA 0000 0001 0000 0000 0000 0000 0000 E600 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 2020 recovered - h00 0000
Low Current Spin!

Re: ST2000LM007 'clicks' and not detected by system

March 9th, 2021, 14:43

most probably heads are gone. not something repairable.

pepe
Post a reply