Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

ST1000LM035-1RK172 cant read LBAs

March 16th, 2021, 12:58

HI
all things is normal, already unlocked, it get those annoying

Code:
Starting LBA of RW Request=00020EE4F7  Length=00000B05
ProcessRWError -Read-   at LBA 00020EEBB2  Sense Code=43110081Out: [PRA]!


How to get rid of? I think need to change sys 93, but what offset ? or maybe with one of this commands

Code:
F"READ_SPARING_ENABLED",0,22
F"WRITE_SPARING_ENABLED",0,22
F"OFFLINE_SPARING_ENABLED",0,22
F"DAR_ENABLED",0,22
F"DISABLE_IDLE_ACTIVITY",1,22
F"BGMS_DISABLE_DATA_REFRESH",1,22
F"ABORT_PREFETCH",1,22
F"READ_LOOKAHEAD_DISABLED_ON_POWER_UP",1,22
F"READ_CACHING_DISABLED_ON_POWER_UP",1,22
F"MediaCacheControl",00,22

Re: ST1000LM035-1RK172 cant read LBAs

March 17th, 2021, 12:50

OKay, I used above commands, and it seem for now my problem solve, start imaging.
Post a reply