April 28th, 2021, 6:09
ID-2: /dev/sdb type: USB
vendor: Seagate model: ST1000LM024 HN-M101MBB size: 931.51 GiB block
size: physical: 512 B logical: 512 B rotation: 5400 rpm serial: <filter>
rev: 1.14 scheme: MBR
smartctl
$ sudo smartctl -t short -s on -T permissive -T permissive -T permissive /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-4.19.0-16-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Powered by phpBB © phpBB Group.