Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

I need ROM ST1000LM035 1RK172-177 FW:HWM2

May 6th, 2021, 21:15

I need ROM ST1000LM035 1RK172-177 FW:HWM2
image_2021_05_05T03_11_49_207Z.png
image_2021_05_05T03_11_49_207Z.png (346.41 KiB) Viewed 9887 times

Error this.
Bad CRC Seg:0x06
LED:0x000000BB FAddr:0x00004A18


Or anyone can fix drives ROM file ?
ST1000LM035 1RK172 FW_HWM2 .rar
(395.41 KiB) Downloaded 393 times

Re: I need ROM ST1000LM035 1RK172-177 FW:HWM2

May 7th, 2021, 7:09

Hello,

The main problem is that a large part of RAP is erased, hence the CRC error. A bit less serious problem is that CAP is also erased.
I don't say it is beyond recovery but 1.) it needs a significant amount of research, 2.) most probably it won't be recoverable after that, 3.) it would cost a lot even if no results at the end.

pepe

Re: I need ROM ST1000LM035 1RK172-177 FW:HWM2

June 1st, 2021, 7:46

I have give this drive to another DR. Then can't solve. Also MRT tecnician analysing ROM.

Problem occured sudden electrical shot down custumer said.


Thanks for info @pepe
Post a reply