All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: wd20ezrx is not recognized
PostPosted: June 21st, 2021, 12:31 
Offline

Joined: April 18th, 2021, 8:10
Posts: 1
Location: Iran,Mashhad
I've a wd20ezrx hdd which is not recognized in system.
hdd doesn't have any strange sounds but it restarts after 45 seconds and stops spinning after 90 seconds
it can be seen in the attachment that the capacity is shown 0 and zone allocation table shows error
moreover "Loading module sa dir" fails too and an error page appears
do you have any idea about the problem?


Attachments:
File comment: wdc marvell page in mrt
b8cfc60e-dcee-465b-8ffa-51c45b0c771e.jpg
b8cfc60e-dcee-465b-8ffa-51c45b0c771e.jpg [ 148.76 KiB | Viewed 6052 times ]
File comment: mrt common tools page
6e66af96-d42d-4d4c-a432-e5a7572122e2.jpg
6e66af96-d42d-4d4c-a432-e5a7572122e2.jpg [ 48.25 KiB | Viewed 6052 times ]
Top
 Profile  
 
 Post subject: Re: wd20ezrx is not recognized
PostPosted: June 25th, 2021, 3:17 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1418
Location: Portugal
Block SA access on ROM, enter in Kernel mode and load a loader.
Try to see if you can access SA.
Those drives tend to have 1 or more bad/weak heads which prevent the drive to be well recognized.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group