Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Donordrive

July 12th, 2021, 7:33

I have a seagate ST31000333AS, P/N 9FZ136-100, Firmware LC15
I amlooking for donordrive for swapping HDA.
The motor has stopped spinng, and its stucked, so i need to swap the platters to another HDA.

Re: Donordrive

July 14th, 2021, 5:03

you can use any Brinks or Pharaoh(4+heads), probably Moose as well (1TB version) HDA i think. However, prepare yourself for quite some suck if you 'just' swap the platters over.

pepe

Re: Donordrive

July 14th, 2021, 11:06

I like to make sure that the bottom side of the motor matches between patient and donor, too. Some are flush, while others are indented slightly.

Individual platter swap can be done, but it isn't easy and certainly not something you'd want to do without having PC3000 available.

Re: Donordrive

July 14th, 2021, 13:25

lcoughey wrote:I like to make sure that the bottom side of the motor matches between patient and donor, too. Some are flush, while others are indented slightly.

Individual platter swap can be done, but it isn't easy and certainly not something you'd want to do without having PC3000 available.


I have PC3000 available.

Re: Donordrive

July 16th, 2021, 12:58

pepe wrote:you can use any Brinks or Pharaoh(4+heads), probably Moose as well (1TB version) HDA i think. However, prepare yourself for quite some suck if you 'just' swap the platters over.

pepe


Hello,
If he is experienced its not a issue ,if not then your outcome might be true :mrgreen:
Post a reply