Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
August 5th, 2021, 17:22
Not sure if it it is a valid measurement, but both read 00.2 on the 200 ohm setting.
August 5th, 2021, 17:36
If the resistance to ground is a dead short on the +5V rail, I would think that the drive would shut down the PSU.
August 10th, 2021, 9:27
You can get steadier hands by using a microscope. After a little practice, your hands are automatically getting steadier.
Powered by phpBB © phpBB Group.