Hello.

Is it possible to decrypt (jms538s) the IMAGE of the hard drive taken after changing the electronics of USB -> SATA. The story is this: I changed the electronics, found that the 0 head was damaged. Instinctively, I made copies of the remaining 3 heads. After taking the image, I found HEH that the disk is encrypted. I found the head dose and changed it, it turned out that the head no.2 is weak, it reads slowly or reads with errors. I made an image of 0.1 and 3 heads and unfortunately the old set of heads was damaged, I thought I took them out more gently than the donor, maybe the fresh air hurt them . I have 50 hdd of these, but this one is unique.
Any ideas? Thank you in advance.

What equipment are you using? Do you have PC3K?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

@ northwind

There is no need for the 3k here btw,,, it can be done

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Yes i have pc3k.

Oh no, it's that simple? I thought that only I was a careless man. And it was described on the blog .... Which I should check. I'm sorry for the trouble.