October 9th, 2021, 14:02
[Sat Oct 9 19:37:44 2021] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[Sat Oct 9 19:37:44 2021] usb 2-1: New USB device found, idVendor=0bc2, idProduct=61b5
[Sat Oct 9 19:37:44 2021] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Sat Oct 9 19:37:44 2021] usb 2-1: Product: M3 Portable
[Sat Oct 9 19:37:44 2021] usb 2-1: Manufacturer: Seagate
[Sat Oct 9 19:37:44 2021] usb 2-1: SerialNumber: NM163ASR
[Sat Oct 9 19:37:44 2021] usbcore: registered new interface driver usb-storage
[Sat Oct 9 19:37:44 2021] scsi host2: uas
[Sat Oct 9 19:37:44 2021] usbcore: registered new interface driver uas
[Sat Oct 9 19:37:44 2021] scsi 2:0:0:0: Direct-Access Seagate M3 Portable 0710 PQ: 0 ANSI: 6
[Sat Oct 9 19:37:44 2021] sd 2:0:0:0: Attached scsi generic sg2 type 0
[Sat Oct 9 19:38:32 2021] sd 2:0:0:0: [sdc] Spinning up disk...
[Sat Oct 9 19:38:53 2021] .
[Sat Oct 9 19:39:54 2021] .
[Sat Oct 9 19:40:56 2021] .
[Sat Oct 9 19:40:56 2021] not responding...
[Sat Oct 9 19:41:47 2021] sd 2:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[Sat Oct 9 19:41:47 2021] sd 2:0:0:0: tag#0 CDB: Read capacity(16) 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00
[Sat Oct 9 19:41:47 2021] scsi host2: uas_eh_device_reset_handler start
[Sat Oct 9 19:41:47 2021] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[Sat Oct 9 19:41:47 2021] scsi host2: uas_eh_device_reset_handler success
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[Sat Oct 9 19:41:57 2021] scsi host2: uas_eh_device_reset_handler start
[Sat Oct 9 19:41:57 2021] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[Sat Oct 9 19:41:57 2021] scsi host2: uas_eh_device_reset_handler success
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: Device offlined - not ready after error recovery
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Sense not available.
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Sense not available.
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] 0-byte physical blocks
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Write Protect is off
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Mode Sense: 01 00 00 00
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Asking for cache data failed
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: rejecting I/O to offline device
[Sat Oct 9 19:41:57 2021] sd 2:0:0:0: [sdc] Attached SCSI disk
Boot 0x80M
QB
Rst 0x80M
Srv DETCR init 0x0000
FTU
(P) SATA Reset
RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
PrgF
(MC POR Duration): 000000008C
Send Status: COMRESET seen
CSpd= 6Gbps
DSC
FAFH_TRIGGER_POWER_UP
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
No Phy: Staggered spin bypass
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 6Gbps
PowerState = IDLE1
VC0
(DOS) File Save Wrst Ct: 0000 SU: FFFFFFFF NT: 00000000 OT: 00000000
HighPowerMode
XI2
VC1
VC2Up:Status 0001 Req 0002
PowerState = IDLE2
VC0
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
No Phy: Staggered spin bypass
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 6Gbps
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
No Phy: Staggered spin bypass
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 6Gbps
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
No Phy: Staggered spin bypass
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 6Gbps
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
No Phy: Staggered spin bypass
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 6Gbps
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
No Phy: Staggered spin bypass
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 6Gbps
October 9th, 2021, 16:40
October 9th, 2021, 16:54
October 9th, 2021, 17:08
Seems to be working well enough to id the drive properly... Looks like constant resets without power down but we have seen some freaky USB related stuff lately. If the data is important I'd take pepe up on his offer.pepe wrote:edit: i've just saw it later it is attached through usb, the bridge might also be failing... (no phy)
October 10th, 2021, 4:43
Boot 0x80M
QB
Rst 0x80M
Srv DETCR init 0x0000
FTU
(P) SATA Reset
RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
PrgF
(MC POR Duration): 000000008C
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
FAFH_TRIGGER_POWER_UP
PowerState = IDLE1
(DOS) File Save Wrst Ct: 0000 SU: FFFFFFFF NT: 00000000 OT: 00000000
HighPowerMode
XI2Status 0001 Req 0002
PowerState = IDLE2
VC0
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 3Gbps
(H) SATA Reset
SSPSaveSettings
SSPRestoreSettings
Send Status: COMRESET seen
CSpd= 3Gbps
October 11th, 2021, 3:58
October 11th, 2021, 4:24
Unfortunately DMDE can't see it either. It does not pass towards being available as a /dev/sdX device.northwind wrote:It may be just me, but I don't see anything wrong with this terminal output.
Try and download DMDE, connect your drive through SATA just like before and see if DMDE sees it.
October 11th, 2021, 9:55
October 11th, 2021, 10:24
Lardman wrote:I assume it's not seen properly (capacity etc) in the bios either? You could post the rom if you have a way to read it. Unlocking needs expert knowledge or expensive tools, it's locked to keep people out for a reason.
October 11th, 2021, 10:48
Do you have an external programmer ?alpy wrote:If you could guide me on how to read the ROM content I would be happy to post.
October 11th, 2021, 11:11
Lardman wrote:Do you have an external programmer ?alpy wrote:If you could guide me on how to read the ROM content I would be happy to post.
https://blog.acelaboratory.com/how-to-read-rom-via-programmer-device.html
October 12th, 2021, 5:08
October 13th, 2021, 2:31
October 13th, 2021, 4:51
October 13th, 2021, 5:18
October 13th, 2021, 6:06
October 13th, 2021, 8:20
fzabkar wrote:The OP could bypass the SATA coupling capacitors in case one of them were open. A point-to-point resistance test might be advisable also.
October 13th, 2021, 8:44
alpy wrote:fzabkar wrote:The OP could bypass the SATA coupling capacitors in case one of them were open. A point-to-point resistance test might be advisable also.
In fact, I've already done this. :)
It has significantly improved the communication with USB-SATA bridge, but did not show any improvement with direct connection.
October 13th, 2021, 10:33
fzabkar wrote:The capacitors are intended to isolate the DC bias on each side, so direct coupling would be inadvisable.
Powered by phpBB © phpBB Group.