ST10000DM003 1CH162-512

[HddDonorMarket]

Client says ROM and PCB original .
no strange sound. Drive stuck busy mode.
tried with donorpcb writed rom to donor pcb. same .
Unlocked firmware. Same
blocked H0 same (also h1 same)

terminal log;

Code:


Boot 0x40M
Spin Up
RECOV Servo Op=0100 Resp=0005
Trans.

Spin Up
SpinOK
TCC:001B

PreampFaultStatus = 0084
.
.
.
.
PreampFaultStatus = 0084
PreampFaultStatus = 0084
SIM Error 1002 LBA 00000000000398AF FD FCFFF3FF
RW Error C4440080
(P) SATA Reset

SIM Error 1002 LBA 00000000000352F6 FD FC37F30A
RW Error C4440080
SimErrorCode = 00001002, RWErrorCode = C4440080
The Registry is corrupt.

LED:000000BD FAddr:00006454
Rst 0x40M
SIM Error 1002 LBA 00000000000398AF FD FCFFF3FF
RW Error C4440080
PreampFaultStatus = 0084
PreampFaultStatus = 0084
.
.
.
.
PreampFaultStatus = 0084
PreampFaultStatus = 0084
SIM Error 1002 LBA 0000000000039FBA FD FCFFF3FF
RW Error C4440080
LED:000000BD FAddr:00006454
LED:000000BD FAddr:00006454
LED:000000BD FAddr:00006454
LED:000000BD FAddr:00006454
LED:000000BD FAddr:00006454
LED:000000BD FAddr:00006454
LED:000000BD FAddr:00006454



Terminal log

Terminal.rar

(365 Bytes) Downloaded 494 times

ROM

Data-W1D43ATH-2003041401.rar

(195.78 KiB) Downloaded 500 times

I need advices
Is it head issue ?? ( I dont guess that )

[northwind]

Is your drive's s/n W1D43ATH ?

[HddDonorMarket]

Is your drive's s/n W1D43ATH ?

Yes. I have checked that before.

I have tried virtual start procedure.
Power of on. Terminal stuck after press exchange command. .
Terminal log write just "redy" . Stopping .
If press ctrl -z
Same error log as posted before above

[HddDonorMarket]

ST10000DM003 1CH162-512 Wrong
my drive ST1000DM003 1CH162-512
CC47
SN: W1D43ATH

I need virtual start loader - 3D file. using MRT

[siamak5561]

Here virtual3d from ST1000DM003-1CH162-CC47

Attachments

F3-58-CC47Virtual3D.rar

(508.83 KiB) Downloaded 530 times

[cpm1993]

PreampFaultStatus = 0084

Change the heads ^

[pepe]

it is able to load some of the fw from the sa, but obviously there are some (30A for example) it cannot read. Heads are probably good, main sa head at least.
pepe

[HddDonorMarket]

Here virtual3d from ST1000DM003-1CH162-CC47

thx

PreampFaultStatus = 0084
Change the heads ^

it is able to load some of the fw from the sa, but obviously there are some (30A for example) it cannot read. Heads are probably good, main sa head at least.
pepe

2 different comment...

I have got MRT Remote support. Tecnician tried to solve. but said need short circiut to get T> level.
I have tried so many. But cannot. (I am not experienced about short circiut.)
And MRT told Would be necessary change head.

I think head is ok . So drive working so well..
Searched forums and google. Not much info about this situation.
I am thinking about , would give the drive to more experienced DR company . So I wont try head swap . Hate Seagate

[pepe]

i built some special loaders for such situations and also have instrumentation to check heads individually, which is pretty much basic thing when i want to diagnose a problem properly.
I like seagate. sorry
leave me a pm if you consider shipping it.
pepe

[HddDonorMarket]

i built some special loaders for such situations and also have instrumentation to check heads individually, which is pretty much basic thing when i want to diagnose a problem properly.
I like seagate. sorry
leave me a pm if you consider shipping it.
pepe

Thanks for advice but client wont accept overseas solutions about cost.

[pepe]

i am not overseas... but of course the price range may differ...

[HddDonorMarket]

i am not overseas... but of course the price range may differ...

))

[mikail13]

bana getir bakayım.
sultangazi deyim..
0505 403 35 80

[HddDonorMarket]

bana getir bakayım.
sultangazi deyim..
0505 403 35 80

Istanbul'da değilim.

[DRCP]

HddDonorMarket,

[gps31]

Like Same but headmap Edit solved

https://forum.hddguru.com/viewtopic.php ... us#p292763

https://forum.hddguru.com/viewtopic.php ... r+1002+LBA

[gps31]

Just try this

ST1000DM003-W1D43ATH-2003041401.rar

(873.46 KiB) Downloaded 306 times