Hello
Drive in topic came clicking and needs heads replacement.
After heads changed I was able to image approximately first 200GB.
The drive now come ready but no UA access and the ata registers failed when trying to enter the seagate utility.
Terminal shows :
SIM_Readydiskfile failure1:
ErrorCode: 0x00001002
SIM_Readydiskfile read again
SIM_Readydiskfile failure2:
ErrorCode: 0x00001002
DSC PASS
(P) SATA Reset

Any suggestions would be appreciated

0x1002: Memory Miscompare Error

Thanks for your input.
Is it related to MC?

heads cannot read sysfile so either bad heads or surface defects.

Hi,
Can you share or PM the Error List you have access too .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Well,
It was cloning @ 200GB right why did you stop the process ,You should have let it run by changing cloning parameters in such a way that drive would skip errors

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Case solved ( HM edited to start from H1 )
Thanks all for your inputs.

Can someone explain how to do this procedure? I have the same issue.