unknown wrote:
Hello
Drive in topic came clicking and needs heads replacement.
After heads changed I was able to image approximately first 200GB.
The drive now come ready but no UA access and the ata registers failed when trying to enter the seagate utility.
Terminal shows :
SIM_Readydiskfile failure1:
ErrorCode: 0x00001002
SIM_Readydiskfile read again
SIM_Readydiskfile failure2:
ErrorCode: 0x00001002
DSC PASS
(P) SATA Reset
Any suggestions would be appreciated
Well,
It was cloning @ 200GB right why did you stop the process ,You should have let it run by changing cloning parameters in such a way that drive would skip errors
_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website->
http://www.chandigarhdatarecovery.com