did anybody buy salvationdata products?
March 13th, 2005, 10:55
very strange that only accepts payment for wester union tried to buy firmware repair goes seagate with card credit anything of answer.
what do you find of that?
what do you find of that?
March 13th, 2005, 11:01
Try to do a seach on this forum for "Salvation Data". YOu will find my comments about it. Yes, we bought it once.... uninstalled. And not just me...
Want to do professional data recovery - PC-3000 is what you need.
Tony.
Want to do professional data recovery - PC-3000 is what you need.
Tony.
March 13th, 2005, 11:17
thank you for answering me I am trying to buy pc 3000 but a lot of bureaucracy you are bought pc 3000?
what place you this?
what place you this?
March 13th, 2005, 11:56
Yes, we bought PC3000, and I've been using it for more than half a year now. I already took training in Canada and I think it is very beneficial for everyone. We bought our pc3000 from canada.
Hope that helps.
Tony
Hope that helps.
Tony
RE: Hi
March 13th, 2005, 21:27
Hello Tony,
HDD Firmware Repairer Pro and HDD Sector Repairer Pro software
I'm looking it. Do you mind to email the Salvations data program?
Thank you.
David Sam
HDD Firmware Repairer Pro and HDD Sector Repairer Pro software
I'm looking it. Do you mind to email the Salvations data program?
Thank you.
David Sam
March 14th, 2005, 16:28
Hello all
- To Fabio - PC3000 english version plus training = 8000,00 - to you receive the board in Brasil.
- David Sam - the HDD Firmware and Hdd Sector repair , you can find both at Salvation Data website,
I think that you will not find a "craked version" - the utilities has "DONGLE" protection.
ALso I think that the price in Canada is 7000,00 for the PC3000, but is FOB.
- To Fabio - PC3000 english version plus training = 8000,00 - to you receive the board in Brasil.
- David Sam - the HDD Firmware and Hdd Sector repair , you can find both at Salvation Data website,
I think that you will not find a "craked version" - the utilities has "DONGLE" protection.
ALso I think that the price in Canada is 7000,00 for the PC3000, but is FOB.
March 14th, 2005, 17:54
fabio, you could buy it directly from Acelabs, Russia, it will cost ~ 1400 Euros w/ PC3000 + recovery board + ~300 DHL Shipment
The problem here is that in Brazil it will taxes this at ~ 70%, the way you can minimize this taxes is ask for Acelabs to discriminate for you the software as 1000 Euros, and the boards at 400 Euros, ie
So you will pay the taxes only at the boards ~70% from 400 Euros.
The problem here is that in Brazil it will taxes this at ~ 70%, the way you can minimize this taxes is ask for Acelabs to discriminate for you the software as 1000 Euros, and the boards at 400 Euros, ie
So you will pay the taxes only at the boards ~70% from 400 Euros.
RE: Hi
March 15th, 2005, 20:48
Hi,
Fabio : Yes, buy PC3000 direct from Acelab Russia. They is reasonable price from them and the important is they have a good support and friendly.
cenahum : I'm knew the Salvation have a Dongle but I heard some people
have the cracked version. Only people whether wanted to share this
software.
Thank you.
Fabio : Yes, buy PC3000 direct from Acelab Russia. They is reasonable price from them and the important is they have a good support and friendly.
cenahum : I'm knew the Salvation have a Dongle but I heard some people
have the cracked version. Only people whether wanted to share this
software.
Thank you.
March 20th, 2005, 14:22
forced to all!!!
pc3000 is very difficult of buying due to my parents' bureaucracy very tax without and his/her contract I don't understand anything
salvationdata all that I know that you/they bought says that it is not good
pc3000 is very difficult of buying due to my parents' bureaucracy very tax without and his/her contract I don't understand anything
salvationdata all that I know that you/they bought says that it is not good
I bought software from SalvationData
March 22nd, 2005, 5:38
I bought their Maxtor Firmware Repairer Pro some time back. So far I couldn't fix firmware problems with any of the drives. They don't provide any updated firmware and the ones they supply are not working with the same spec drives they specify.
But I was able to repair few 2B020H1 drives using their free utility. Some skewing is happening while uploading the firmware to the drive and hence all the files can be recovered using some software but no integrity at all.
But I was able to repair few 2B020H1 drives using their free utility. Some skewing is happening while uploading the firmware to the drive and hence all the files can be recovered using some software but no integrity at all.
March 23rd, 2005, 14:29
I had a special case for data recovery of a fujitsu mht2060at a few month ago.
I thougt from their software description at their home page that "fujitsu repairer pro" could fix my problem.
Ok-we did the correspondence and paid the money(western union) - it took approximately 2 weeks and the software was here.
I know now that it works very unreliable especially the firmware check of the program.
It checks every mod and if it could read the first 512 bytes of every mod - it tells you "fw check-ok!"
It sends errors only if a mod is destroyed from its header that is a bit to unreliable for me.
What I mean is if "fuj rep pro" is able to read or copy the first 512 bytes it tells you everything is ok but some mods are larger than 512 bytes and that is the main problem - if you have bad sectors in the mods it does not
recognize it - I think because it does not analyse and check the right lenght of every special module.
It copies the first 512 bytes and tells you "fw copied ok!"
I checked it with a "not in bios defined" mhs2030at - "fujitsu repairer pro" could only see errors in two mods but there were in sum 7 modules bad.
I think they have a lot of work to fix this with an update.
Hope I could help a little bit
I thougt from their software description at their home page that "fujitsu repairer pro" could fix my problem.
Ok-we did the correspondence and paid the money(western union) - it took approximately 2 weeks and the software was here.
I know now that it works very unreliable especially the firmware check of the program.
It checks every mod and if it could read the first 512 bytes of every mod - it tells you "fw check-ok!"
It sends errors only if a mod is destroyed from its header that is a bit to unreliable for me.
What I mean is if "fuj rep pro" is able to read or copy the first 512 bytes it tells you everything is ok but some mods are larger than 512 bytes and that is the main problem - if you have bad sectors in the mods it does not
recognize it - I think because it does not analyse and check the right lenght of every special module.
It copies the first 512 bytes and tells you "fw copied ok!"
I checked it with a "not in bios defined" mhs2030at - "fujitsu repairer pro" could only see errors in two mods but there were in sum 7 modules bad.
I think they have a lot of work to fix this with an update.
Hope I could help a little bit
March 23rd, 2005, 15:54
When I called this software "crap", you guys didn't believe me, huh? 
March 23rd, 2005, 16:14
for tony = did you already use hddfirmware pro?
March 24th, 2005, 0:18
Nonsmoker wrote:I had a special case for data recovery of a fujitsu mht2060at a few month ago....
Hi Nonsmoker,
does the prog read 128K rom correctly ?? MHT that is.
March 24th, 2005, 17:22
Hi,fujimax
I will try it and tell it to you tomorrow.
I will try it and tell it to you tomorrow.
RE: I Believe
March 24th, 2005, 20:59
Tony wrote:When I called this software "crap", you guys didn't believe me, huh?
Hi Tony,
I'm believe you this software is "crap". ha ha....
Thank you.
Re: I bought software from SalvationData
March 25th, 2005, 3:17
mathewvg wrote:But I was able to repair few 2B020H1 drives using their free utility. Some skewing is happening while uploading the firmware to the drive and hence all the files can be recovered using some software but no integrity at all.
That utility works only with
DSP version of 2B020H1?
Am I right?
What is happen with Poker version?
regards
Powered by phpBB © phpBB Group.