All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: WD40EDAZ-11SLVB0 drive keeps clicking and reset power
PostPosted: November 18th, 2022, 7:32 
Offline

Joined: July 11th, 2018, 10:55
Posts: 33
Location: India
Hi all

Problem with the drive is initially drive used to spin, click and reset power(its a external 4 tb wd drive with power adapter)

I have read rom from patient pcb and unlocked rom using pc3k and wrote back the unlocked rom to patient pcb after blocking module 02 drive comes ready and i could even backup complete resources all modules look good, but when i allow access to module 02 drive keeps resetting power i had got help from ACE TS they did the same blocking module 02 and opened t2 recovery and saved as t2data.bin and tried to upload module 02 in ram and did warm rest and drive comes ready with full id using utility reading after routing the saved t2data.bin got access to sector but sector looks encrypted and ace ended up leaving no solution.

FYI - the same problem but its an internal drive i solved using the above mentioned method and data was not encrypted
Does any 1 have solution for this drive


Top
 Profile  
 
 Post subject: Re: WD40EDAZ-11SLVB0 drive keeps clicking and reset power
PostPosted: November 18th, 2022, 9:42 
Offline

Joined: January 18th, 2010, 23:53
Posts: 335
Location: india
module 28

Attachment:
28.jpg
28.jpg [ 118.67 KiB | Viewed 2053 times ]


If module 28 is first type then getting Normal,
If module 28 is Second type always getting only Encrypted Data

is there any solution for That ?


Top
 Profile  
 
 Post subject: Re: WD40EDAZ-11SLVB0 drive keeps clicking and reset power
PostPosted: November 22nd, 2022, 3:33 
Offline

Joined: January 18th, 2010, 23:53
Posts: 335
Location: india
gps31 wrote:
module 28

Attachment:
28.jpg


If module 28 is first type then getting Normal,
If module 28 is Second type always getting only Encrypted Data

is there any solution for That ?



Sorry It is MOD 25


Top
 Profile  
 
 Post subject: Re: WD40EDAZ-11SLVB0 drive keeps clicking and reset power
PostPosted: November 22nd, 2022, 5:42 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
jamesrajesh007 wrote:
Hi all

Problem with the drive is initially drive used to spin, click and reset power(its a external 4 tb wd drive with power adapter)

I have read rom from patient pcb and unlocked rom using pc3k and wrote back the unlocked rom to patient pcb after blocking module 02 drive comes ready and i could even backup complete resources all modules look good, but when i allow access to module 02 drive keeps resetting power i had got help from ACE TS they did the same blocking module 02 and opened t2 recovery and saved as t2data.bin and tried to upload module 02 in ram and did warm rest and drive comes ready with full id using utility reading after routing the saved t2data.bin got access to sector but sector looks encrypted and ace ended up leaving no solution.

FYI - the same problem but its an internal drive i solved using the above mentioned method and data was not encrypted
Does any 1 have solution for this drive


Yes it could be done.

_________________
Angel Data Recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 80 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group