December 7th, 2022, 10:54
# hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: HTS541080G9SA00
Serial Number: MPBDLAXNH3MJZM
Firmware Revision: MB4IC60R
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 1
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
cache/buffer size = 7538 KBytes (type=DualPortCache)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
* Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* IDLE_IMMEDIATE with UNLOAD
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
Device-initiated interface power management
* Software settings preservation
Security:
Master password revision code = 65534
supported
enabled
locked
not frozen
expired: security count
not supported: enhanced erase
Security level maximum
52min for SECURITY ERASE UNIT.
Checksum: correct
# hdparm --user-master u --security-unlock xxxxxxxx /dev/sda
security_password: "xxxxxxxx"
/dev/sda:
Issuing SECURITY_UNLOCK command, password="xxxxxxxx", user=user
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 04 51 40 00 21 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# hdparm --user-master m --security-unlock xxxxxxxx /dev/sda
security_password: "xxxxxxxx"
/dev/sda:
Issuing SECURITY_UNLOCK command, password="xxxxxxxx", user=master
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 04 51 40 00 21 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
December 7th, 2022, 17:31
December 7th, 2022, 18:07
December 8th, 2022, 11:49
labtech wrote:MHDD, ZU...
December 8th, 2022, 12:59
December 8th, 2022, 14:32
fzabkar wrote:ZU does not "brute force" the password.
December 8th, 2022, 14:42
December 8th, 2022, 14:45
"." for HGST / IBM
"8" for Native Hitachi
ZU / S. battle with HGST on the Secondary channel :)
ZU / P8 NativeHitachi on Primary channel
December 8th, 2022, 16:51
fzabkar wrote:English translation of ZU readme.txt
...
December 8th, 2022, 17:22
Powered by phpBB © phpBB Group.