All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Hitachi 7K320-320 Family
PostPosted: February 1st, 2023, 9:10 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
Unfortunately Hitachi HDD 7K320-320 ( HTS723232L9A360) is not getting detected with right family in my pc3000udma.
Which family I should select?


Attachments:
hitachi falcon.PNG
hitachi falcon.PNG [ 30.29 KiB | Viewed 6982 times ]
Top
 Profile  
 
 Post subject: Re: Hitachi 7K320-320 Family
PostPosted: February 1st, 2023, 11:51 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
select from custom families

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi 7K320-320 Family
PostPosted: February 1st, 2023, 18:52 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
Quote:
commands to read/write SA, NVRams, etc are the SAME

yeah, but addresses may be different

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi 7K320-320 Family
PostPosted: February 2nd, 2023, 4:01 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
Spildit wrote:
Once the Super On VSC is issued (for your drive starts with 03,03 6E,37 5F,03 ....) the commands to read/write SA, NVRams, etc are the SAME as the ones used for all the other ARM based HGST drives so it shouldn't matter that much ... as long you have the correct super on and you have the correct set of commands to read the firmware and you know how to parse modules like USAG to get to the other modules you should be fine ...


Dear Spildit & pepe Good Morning.
Thank you so much for all the help. :good: :-D
I have been successful to run utility with correct family now and have backed up nvram & other modules as well.
All important modules are healthy.Unfortunately my knowledge is so basic that I will not be able to perform any of the tasks (parse modules etc)
Though 320 GB disk has 4 heads , out of which head 0 is having large bad sectors ( may be it is weak)
I have imaged 70 GB partition using other heads. I will have to skip all data covered Head 0.


Attachments:
head0.PNG
head0.PNG [ 45 KiB | Viewed 6845 times ]
Capture.PNG
Capture.PNG [ 46.45 KiB | Viewed 6845 times ]
1.PNG
1.PNG [ 26.06 KiB | Viewed 6845 times ]
Top
 Profile  
 
 Post subject: Re: Hitachi 7K320-320 Family
PostPosted: February 2nd, 2023, 5:53 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
yes, h0 looks weak, needs swapping...

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi 7K320-320 Family
PostPosted: February 2nd, 2023, 15:57 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
pepe wrote:
yes, h0 looks weak, needs swapping...


Certainly looks that way.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Hitachi 7K320-320 Family
PostPosted: February 3rd, 2023, 7:27 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
Spildit wrote:
pepe wrote:
Quote:
commands to read/write SA, NVRams, etc are the SAME

yeah, but addresses may be different


That's why you parse USAG like this ?

http://www.hddoracle.com/viewtopic.php? ... =20#p22917

On that CLA3 I got the modules by parsing USAG to get the correct address to use on the VSC directly.

Thanks a lot , I always refer HDDORACLE , in fact I have downloaded it for ready ref. :good: :-D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group