fzabkar wrote:
How can two drives die at the same time with the same firmware fault?
They are both in the same QNAP enclosure (RAID 1) and this still very weird.
fzabkar wrote:
Are you able to dump the SA before they go offline?
I managed to unlock by MRT and I could get a full backup of sysfiles.
fzabkar wrote:
Can you retrieve a SMART report?
Yeah sure, I will post it ASAP.
fzabkar wrote:
I expect that the following error is due to the absence of the "DaT" blocks (which you cleared).
After this message appears I could only read 10 MB from UA. Then the drive stuck in busy and repeat this :
Boot 0x0100MVM0148CV10
SpinUp
TCC:001F
Trans
Rst 0x0100MVM0148CV10
SAdd:0x0055A3C5
NVCScram Saved HB Size:020A
LD: MD_Alloc:00000078 HB_Alloc:0000 MD_Alloc:80380000 HB_Alloc:8032 FlashRestore MD_Saved:00000078 HB_Saved:00000000 MD_CRC:0154
PP: MD_Alloc:0000B400 HB_Alloc:0000 FlashRestore
PVTSize: 00002C00 CompSize: 0000008C DeCompSize: 00002C00 MD_Saved:0000008C HB_Saved:00000000 MD_CRC:8183
WCD: MD_Alloc:00012000 HB_Alloc:02E6
FlashRestore............................................................................................................................................................................
Failed power-on replay: 0x0052