hello guys im working on this palmer disk with second sevel translator damaged.zero data 95%
i did the translator regeneration and i got zero data 18% ....however after i wrote the new 190 module and restart the hdd has no ID and no capacity.......... does anyone had same problem?

seems something else damaged
even thought mdl 190 is damaged you will still get full ID

Sir thank you for your time

i can get full ID and capacity if i write the original 190 module! but when ever i write the correct module hard disk click once and get ready without ID and without capacity!

You need to carefully repair and restore the translator.
Regenerating is almost never an option in modern SMR drives.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk

Sir im using the new fuction of data extractor 7.0 but when i write the new translator i do not get ID and capacity

people should not write anything to SA of these drives, you practically kill any chance for someone with proper knowledge recover the thing.
PC3k has a bug with reading 190 too, so if you write that back you (and anyone after that point) are busted .
you need to understand how these work, which is not a simple task i admit.

_________________
Adatmentés - Data recovery

i just did what is written in this page from acelab Sir.........


https://blog.acelab.eu.com/how-to-fix-t ... rsion.html

do they teach a wrong way for this drive? i dont get what part did i do wrong Sir? can you be more specific?

To me, this article should be taken down from public view.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

if make the recovery worse indeed they shouldtake it down Sir
as expert can you share the correct solution Sir?

can you share your solution Sir?