Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 6th, 2024, 5:18
ST500VT000
fw 0001sdc2
pn: 1dk142-502
Please help to repair this eeprom.
This hdd is not spinning. I suspect the eeprom is corrupted because if i put a different pcb it spins but no data access..Original pcb is not spining
- Attachments
-
- ema hdd W25Q40BW@SOIC8-150_20240306_110927.rar
- ST500VT000
fw 0001sdc2
pn: 1dk142-502
- (179.2 KiB) Downloaded 416 times
March 6th, 2024, 9:23
this rom seems ok at first glance, what terminal output do you get?
March 6th, 2024, 12:23
If this drive came out of a surveillance system, perhaps it is firmware locked? (I don't see a PUIS flag in the IAP segment.)
If you can upload your donor ROM, I could transfer the patient's adaptives into it.
I presume that you have tested your patient ROM on the donor PCB and verified that the no-spin symptom moves with the ROM.
March 11th, 2024, 23:50
At first glance, I see that this rom version does not have too serious errors
March 26th, 2024, 12:48
pepe wrote:this rom seems ok at first glance, what terminal output do you get?
You were right. I changed the pcb and moved the rom.. its now solved
March 26th, 2024, 12:49
orangewith wrote:At first glance, I see that this rom version does not have too serious errors
I changed the pcb and moved the rom.. its now solved..
thanks
March 26th, 2024, 12:49
fzabkar wrote:If this drive came out of a surveillance system, perhaps it is firmware locked? (I don't see a PUIS flag in the IAP segment.)
If you can upload your donor ROM, I could transfer the patient's adaptives into it.
I presume that you have tested your patient ROM on the donor PCB and verified that the no-spin symptom moves with the ROM.
The pcb was dead so i moved the rom to new pcb
March 27th, 2024, 1:40
pepe
Powered by phpBB © phpBB Group.