Hi!
I would like to recover data from an Amiga formatted Quantum LP52S (50MB SCSI) drive.
Everything
sounds right with the drive but the geometry is not correct. It reports 0MB. I have tried hooking it up to a couple of different Amigas and even a SCSI adapter in a PC running WinUAE. They all report the same.
From reading these forums, data about geometry could be stored on the platter(s) and this is probably not a firmware issue?
I was hoping the incorrect drive size might not matter in the case of raw imaging software, but it goes nowhere with something that it sees containing "0" data.
I have a similar drive I could use as a donor if that could be helpful in some way.