MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
Josh256
 Post subject: WD 800067 Cannot read real data after head replacement
PostPosted: April 24th, 2025, 20:24 
Offline

Joined: February 12th, 2021, 1:27
Posts: 76
Location: Australia
WD charger 800067 had a faulty PCB and dead heads. we swapped PCB, transferred ROM chip and controller chip from original PCB to donor. then HDD turn on but couldn't identify, next we swapped heads, now HDD powers up and identify and in MRT data explorer, there is data but it's not real data, also tried to unlock SED, any suggestions?


Attachments:
WD 800067ID.jpg
WD 800067ID.jpg [ 259.96 KiB | Viewed 22746 times ]
WD 800067 Exp.jpg
WD 800067 Exp.jpg [ 166.62 KiB | Viewed 22746 times ]
WD 800067 Data .jpg
WD 800067 Data .jpg [ 932.72 KiB | Viewed 22746 times ]
Top
 Profile  
 
digisupport
 Post subject: Re: WD 800067 Cannot read real data after head replacement
PostPosted: April 25th, 2025, 0:41 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 627
Location: Kolding | Denmark
Repair the original pcb and try with that.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
fzabkar
 Post subject: Re: WD 800067 Cannot read real data after head replacement
PostPosted: April 25th, 2025, 3:06 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17228
Location: Australia
Josh256 wrote:
we swapped PCB, transferred ROM chip and controller chip from original PCB to donor.

By "controller chip", do you mean MCU?

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Josh256
 Post subject: Re: WD 800067 Cannot read real data after head replacement
PostPosted: April 25th, 2025, 9:30 
Offline

Joined: February 12th, 2021, 1:27
Posts: 76
Location: Australia
fzabkar wrote:
Josh256 wrote:
we swapped PCB, transferred ROM chip and controller chip from original PCB to donor.

By "controller chip", do you mean MCU?


I mean this chip that marked with red circle around it? I was told by MRT technician that this chip holds the encryption key, Is it the wrong chip?


Attachments:
WD877333 800067 (2).jpg
WD877333 800067 (2).jpg [ 326.92 KiB | Viewed 22538 times ]
Top
 Profile  
 
fzabkar
 Post subject: Re: WD 800067 Cannot read real data after head replacement
PostPosted: April 25th, 2025, 11:58 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17228
Location: Australia
That's the USB-SATA bridge. It does not have an encryption key.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
gps31
 Post subject: Re: WD 800067 Cannot read real data after head replacement
PostPosted: April 26th, 2025, 0:40 
Offline

Joined: January 18th, 2010, 23:53
Posts: 347
Location: india
Can u upload your original Resource backup in ABA mode?
Top
 Profile  
 
IAitaliassistance
 Post subject: Re: WD 800067 Cannot read real data after head replacement
PostPosted: April 26th, 2025, 3:02 
Offline

Joined: April 25th, 2025, 10:22
Posts: 15
Location: italy
it's because Chargers encrypt data via MCU.
You changed PCB, so MCU is different, so data is encrypted.
You need to use original PCB (convert to SATA or use solderless PCBs or....)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 294 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group