Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Iron wolf 4TB Drive - Cimarron Family

August 5th, 2026, 7:09

When i try to patch the rom and write them back i get "Seagate flash boot code" error in terminal, I tried with all the 3 patches but its the same i have attached the rom as well can any one help me patch this rom for me

Drive details:
ST4000NE001
2MA101-500
F/W: EN01

Re: Iron wolf 4TB Drive - Cimarron Family

August 5th, 2026, 10:13

I do not understand the need to mess with the disk firmware. Unless the disk is dysfunctional leave well enough alone.

Re: Iron wolf 4TB Drive - Cimarron Family

August 5th, 2026, 18:36

jamesrajesh007 wrote:When i try to patch the rom and write them back i get "Seagate flash boot code" error in terminal, I tried with all the 3 patches but its the same i have attached the rom as well can any one help me patch this rom for me

Drive details:
ST4000NE001
2MA101-500
F/W: EN01


I don't see a file. Ensure you start the utility with the family selected. Generic F3 can create this issue.

Re: Iron wolf 4TB Drive - Cimarron Family

August 5th, 2026, 21:34

Hardcore Games wrote:I do not understand the need to mess with the disk firmware. Unless the disk is dysfunctional leave well enough alone.

Bold statement with as little information about the reason for messing with the firmware.

Re: Iron wolf 4TB Drive - Cimarron Family

August 6th, 2026, 2:26

Not able to get sector access, for the reason i need rom patch to get sys files access
Attachments
ROM_WS24SYG3_0C7B1D6A.rar
Have attached the original rom
(346.49 KiB) Downloaded 19 times

Re: Iron wolf 4TB Drive - Cimarron Family

August 10th, 2026, 6:34

can you share the full terminal log on power up... it will explain many things...

Re: Iron wolf 4TB Drive - Cimarron Family

August 10th, 2026, 9:14

MindMergepk wrote:can you share the full terminal log on power up... it will explain many things...



Hi pls find the below terminal log

Terminal log before ROM patch


Boot0x0100MBJ0371EN01
Trans
Rst0x0100MBJ0371EN01
(P)SATAReset

NVCScramSavedHBSize:020A
LD:MD_Alloc:000000F0HB_Alloc:0000DiscRestoreMD_Saved:000000F0HB_Saved:00000000MD_CRC:8679
PP:MD_Alloc:0000F000HB_Alloc:0000DiscRestore
PVTSize:00045458 CompSize:000008BE DeCompSize:00045458MD_Saved:000008BEHB_Saved:00000000MD_CRC:44CC
TW:MD_Alloc:00000400HB_Alloc:002EDiscRestoreMD_Saved:00000160HB_Saved:00000000MD_CRC:0000
GC:MD_Alloc:00005000HB_Alloc:0000DiscRestoreMD_Saved:00004320HB_Saved:00000000MD_CRC:2AE0
DSP029F
2Sync:0 4

No Sector access

Terminal Log after patching ROM


Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Re: Iron wolf 4TB Drive - Cimarron Family

August 11th, 2026, 10:53

Thedatarecoverylab wrote:
MindMergepk wrote:can you share the full terminal log on power up... it will explain many things...



Boot0x0100MBJ0371EN01
Trans
Rst0x0100MBJ0371EN01
(P)SATAReset

NVCScramSavedHBSize:020A
LD:MD_Alloc:000000F0HB_Alloc:0000DiscRestoreMD_Saved:000000F0HB_Saved:00000000MD_CRC:8679
PP:MD_Alloc:0000F000HB_Alloc:0000DiscRestore
PVTSize:00045458 CompSize:000008BE DeCompSize:00045458MD_Saved:000008BEHB_Saved:00000000MD_CRC:44CC
TW:MD_Alloc:00000400HB_Alloc:002EDiscRestoreMD_Saved:00000160HB_Saved:00000000MD_CRC:0000
GC:MD_Alloc:00005000HB_Alloc:0000DiscRestoreMD_Saved:00004320HB_Saved:00000000MD_CRC:2AE0
DSP029F
2Sync:0 4

No Sector access

Terminal Log after patching ROM


Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016


the first log seems fine, NVC is intact,
did you send handshake while checksum failure error in terminal on new drives this is normal... after handshake drive started spinning and unlock..

Re: Iron wolf 4TB Drive - Cimarron Family

August 12th, 2026, 3:55

MindMergepk wrote:
Thedatarecoverylab wrote:
MindMergepk wrote:can you share the full terminal log on power up... it will explain many things...



Boot0x0100MBJ0371EN01
Trans
Rst0x0100MBJ0371EN01
(P)SATAReset

NVCScramSavedHBSize:020A
LD:MD_Alloc:000000F0HB_Alloc:0000DiscRestoreMD_Saved:000000F0HB_Saved:00000000MD_CRC:8679
PP:MD_Alloc:0000F000HB_Alloc:0000DiscRestore
PVTSize:00045458 CompSize:000008BE DeCompSize:00045458MD_Saved:000008BEHB_Saved:00000000MD_CRC:44CC
TW:MD_Alloc:00000400HB_Alloc:002EDiscRestoreMD_Saved:00000160HB_Saved:00000000MD_CRC:0000
GC:MD_Alloc:00005000HB_Alloc:0000DiscRestoreMD_Saved:00004320HB_Saved:00000000MD_CRC:2AE0
DSP029F
2Sync:0 4

No Sector access

Terminal Log after patching ROM


Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016


the first log seems fine, NVC is intact,
did you send handshake while checksum failure error in terminal on new drives this is normal... after handshake drive started spinning and unlock..



Hi thank you so much for the support, it worked after translator regeneration got all sector access
Post a reply