Hello,

ST3808110AS
Need ldr (7200.9 Tonka2)
3.ADJ

Thanks in advance.

Found it on hddsurgery fw database.
But the problem still, and I get ATA ovl address failure.

Any suggestions?
Thanks in advance

4096k x 16 SDRAM
TONKA2 - 1_Disk M-31 03-22-06 10:53
Head Mask FFFF - Switch to full int.
Spin Ready
(P)SATA Reset
DiskAccess ReadSector EC=43 at ffffffff.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.0002

12FFLUSH-1 Fail

CE Log ErrCode=0 LBA=0 Type=aDiskAccess ReadSector EC=43 at ffffffff.00.0059
DiskAccess ReadSector EC=43 at ffffffff.00.0059
Failed sys sect. write! Nwt Er 33 RdWr 15d5f.00.0007

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 15d5f.00.0007

Initializing SMART SectorsFailed sys sect. write! Nwt Er 33 RdWr 15d5f.00.0007

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 15d5f.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.0002
Unable To Load Overlay 01|000A

I can read user sectors via terminal, but it's very slow.

Is anything readable from the SA? Either the heads (surface) are dead, or someone formatted it with an m0... format.
Writing to the SA can be forced (1>F), but that might worsen the user data situation.