How does one access a HD firmware
June 2nd, 2005, 17:10
Can someone please tell me how to access or fix a HD firmware?
I'm not sure what tools need to be used.
I'm not sure what tools need to be used.
June 3rd, 2005, 7:42
I know that you can access the firmware using a firmware upgrade provide by manufactur and you can use an VS ata command or you can try SalvationData - PC3000 or HRT products.
Has people here that know others ways including some things that are very cheap, lets wait to see if they will tell you and to all of us.
I saw here one info about one software to do this job, I ask at the post and I sent message to the guy that wrote it, but he never answer me, maybe you will have better lucky I hope.
Jose Pinto
Has people here that know others ways including some things that are very cheap, lets wait to see if they will tell you and to all of us.
I saw here one info about one software to do this job, I ask at the post and I sent message to the guy that wrote it, but he never answer me, maybe you will have better lucky I hope.
Jose Pinto
June 3rd, 2005, 8:45
Ah, this question and subject has been spoken about so often
and mostly the answer is go to tt13_org - here there is so much information
most of which must be known but little of which is needed for soft_repair of drives.
and mostly the answer is go to tt13_org - here there is so much information
most of which must be known but little of which is needed for soft_repair of drives.
Powered by phpBB © phpBB Group.