MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Previous topic | Next topic 
Author Message
sempre
 Post subject: MAXTOR 541DX MODEL 2B020H1
PostPosted: November 18th, 2005, 15:58 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
HDA 11B PCBA 06A UNIQUE 32A CODE WAH21PB0
MODEL MAXTOR ATHENA
FIRMWARE WAH21PBZ
MHDD SCAN !!!! IN 100%
It is a problem of firmware?
how to jumper for mode to save?
with the tool of salvation it decides this problem?
It can help me?
Thanks
Top
 Profile  
 
sempre
 Post subject: Original plate is bad
PostPosted: November 18th, 2005, 16:05 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
it is with another plate
Top
 Profile  
 
pepe
 Post subject:
PostPosted: November 18th, 2005, 16:43 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
Hi,

it seems like FW problem. I don't use Salvation, so I don't have opinion about it.
what does 'it is with another plate' mean?
PCB?

pepe
Top
 Profile  
 
sempre
 Post subject: yes another one PCB!
PostPosted: November 19th, 2005, 7:11 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
pepe wrote:
Hi,

it seems like FW problem. I don't use Salvation, so I don't have opinion about it.
what does 'it is with another plate' mean?
PCB?

pepe
Top
 Profile  
 
pepe
 Post subject:
PostPosted: November 19th, 2005, 10:11 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
Hi,

If U are sure the donor PCB is from the same FW version as the patient drive, it may be a disk FW corruption also.
but first make sure that U found a matching board by the HDA, PCBA and UNIQUE codes.

pepe
Top
 Profile  
 
sempre
 Post subject: ok!!!
PostPosted: November 19th, 2005, 16:28 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
pepe wrote:
Hi,

If U are sure the donor PCB is from the same FW version as the patient drive, it may be a disk FW corruption also.
but first make sure that U found a matching board by the HDA, PCBA and UNIQUE codes.

pepe
Top
 Profile  
 
darkfroce1
 Post subject: It Worked for me
PostPosted: November 19th, 2005, 16:51 
Offline

Joined: September 28th, 2005, 14:53
Posts: 127
Salvation worked for me demo is good. tried on 2 disk 1 was recovered but 2second :(

go for demo

8)
Top
 Profile  
 
Along
 Post subject: Re: MAXTOR 541DX MODEL 2B020H1
PostPosted: November 25th, 2005, 17:42 
Offline

Joined: November 6th, 2005, 15:06
Posts: 22
Location: Sukaluyu
The problem is the Fw....

Use PC3000 to record the fw (MODULE)..

Type safe your HDD jumper.
Before you record the fw, just see the firmware structure, check the : CSR in LDR.

just write the firmware and Module group (*.rpm and *.smb).

regards,
Along

_________________
HDD is a COMPUTER...
Top
 Profile  
 
pepe
 Post subject: Re: MAXTOR 541DX MODEL 2B020H1
PostPosted: November 26th, 2005, 5:21 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
Along wrote:
just write the firmware and Module group (*.rpm and *.smb).


:) that's an easy way to kill a drive :)
Top
 Profile  
 
gurudev
 Post subject: right
PostPosted: November 26th, 2005, 5:52 
Offline

Joined: September 27th, 2005, 5:04
Posts: 37
Yes,
pepe is right !!

Write only the corrupted modules.

regards
Top
 Profile  
 
sempre
 Post subject: Re: MAXTOR 541DX MODEL 2B020H1
PostPosted: November 26th, 2005, 9:50 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Along wrote:
The problem is the Fw....

Use PC3000 to record the fw (MODULE)..

Type safe your HDD jumper.
Before you record the fw, just see the firmware structure, check the : CSR in LDR.

just write the firmware and Module group (*.rpm and *.smb).

regards,
Along


decided problem!

Thanks!!
Top
 Profile  
 
pepe
 Post subject:
PostPosted: November 26th, 2005, 16:06 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
that's good, we are happy now! ;)
pepe
Top
 Profile  
 
maamar
 Post subject:
PostPosted: January 20th, 2006, 4:28 
Offline

Joined: January 18th, 2006, 9:57
Posts: 1
please can you send me pc3000 in english or french please merci
maamar.guenfoud@club-internet.fr
Top
 Profile  
 
prodata
 Post subject:
PostPosted: January 20th, 2006, 7:58 
Offline
User avatar

Joined: October 6th, 2005, 3:00
Posts: 657
repairing HDD is not as easy as You Think.
First you must to understand How HDD work then you can repair it...
but The most important is Know what make the HDD become problem.
if it is problem is F/w Not just rewrite it will be OK..
A bad decision in writing the Module will make the drive become worst.. and difficult to repair it anymore....
Top
 Profile  
 
coffeebean
 Post subject: Re: right
PostPosted: January 20th, 2006, 18:01 
Offline

Joined: November 1st, 2005, 10:04
Posts: 238
gurudev wrote:
Yes,
pepe is right !!

Write only the corrupted modules.

regards


Ah, even that can break the drive - better still ..
write only the necessary corrupted mods and even then...
maybe some screen says a mod is corrupted when it is in fact not.

so yes this is why it is not so easy - agreed...
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 129 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group