All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: How To Recovery Toshiba hdd GAP,GAX model
PostPosted: February 2nd, 2006, 14:07 
Offline

Joined: July 29th, 2005, 3:29
Posts: 27
Location: Indonesia
is very dificult to repair & recovery toshiba hdd crash (knocking sound with busy signal and then no signal detected in mhdd) with GAS & GAP model , replacing head or platter only 5% succses.How efectif method or scripting to repairing it?I was looked every disscusion forum, if anyone have trouble with this model , no reply or solution.


Top
 Profile  
 
 Post subject:
PostPosted: February 24th, 2006, 8:11 
Offline

Joined: February 21st, 2006, 4:59
Posts: 109
hi yudi,

it is bad to nobody reply.......... :(

friend how long you check it ......
AFTER SOMETIME DRIVE STOPS SPINNING, AND SOME TIME IT WORKS(MEANS BUSY FALLS AND DRIVE DETECTION).
I MEAN HOW LONG YOU CONNECT IT TO THE COMPUTER....

I THINK YOU ARE PROFESSIONAL AND UNDERSTAND WHAT I WANT TO SAY.
CHECK THE PROPER STATUS.

I WILL HELP YOU IF I CAN.

THANKS
:agree:


Top
 Profile  
 
 Post subject: Re: How To Recovery Toshiba hdd GAP,GAX model
PostPosted: March 3rd, 2006, 5:53 
Offline

Joined: November 6th, 2005, 15:06
Posts: 22
Location: Sukaluyu
Hi Yudi, Are come from Indonesia? Hehehe... :lol: :lol: :lol:
HDD Toshiba that you mean 2.5" (Notebook HDD)?
Knocking sounds that you hear, it come from the corrupt of firmware modules of HDD.
Just flash it using PC3K Windows...
I know, you are the best.. :D :D
Just try it friends, that cash man.... (Itu duit pak...)

Advanced Regard,
Along...

_________________
HDD is a COMPUTER...


Top
 Profile  
 
 Post subject: Re: How To Recovery Toshiba hdd GAP,GAX model
PostPosted: March 8th, 2006, 17:57 
Offline

Joined: July 29th, 2005, 3:29
Posts: 27
Location: Indonesia
Along wrote:
Hi Yudi, Are come from Indonesia? Hehehe... :lol: :lol: :lol:
HDD Toshiba that you mean 2.5" (Notebook HDD)?
Knocking sounds that you hear, it come from the corrupt of firmware modules of HDD.
Just flash it using PC3K Windows...
I know, you are the best.. :D :D
Just try it friends, that cash man.... (Itu duit pak...)

Advanced Regard,
Along...


Thanks very much along (My The best friend) for u support . I was try with pc3k for windows,but i can't repaire this firmware module.This hdd knocking can't stop , are u know whats module number must be overwrite? Lieur jang geuningan. Or somebady can help me?


Top
 Profile  
 
 Post subject:
PostPosted: March 12th, 2006, 4:06 
Offline

Joined: July 29th, 2005, 3:29
Posts: 27
Location: Indonesia
thanks for all,
It's very Easy to solved this problems.The solutions come from myself .
Toshiba Notebook..Simple manufacture, only...Dump dump dump dump..ROM.....finish.and smile.....!!!

-----------------------------Happy Ending-----------------------------------------


Top
 Profile  
 
 Post subject:
PostPosted: March 12th, 2006, 15:57 
Offline

Joined: August 19th, 2005, 23:42
Posts: 23
hi yudi
welcome back and happy End :)
Regards


Top
 Profile  
 
 Post subject:
PostPosted: March 13th, 2006, 1:33 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
yudi wrote:
thanks for all,
It's very Easy to solved this problems.The solutions come from myself .
Toshiba Notebook..Simple manufacture, only...Dump dump dump dump..ROM.....finish.and smile.....!!!

-----------------------------Happy Ending-----------------------------------------


Hello Yudi,

could U expand the solution a little bit more, please?
thank you,
pepe


Top
 Profile  
 
 Post subject:
PostPosted: March 13th, 2006, 5:29 
Offline

Joined: July 29th, 2005, 3:29
Posts: 27
Location: Indonesia
thanks for pepe, i am sory very much.


Last edited by yudi on March 13th, 2006, 14:15, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: March 13th, 2006, 7:03 
Offline

Joined: November 1st, 2005, 10:04
Posts: 238
soon this will become a mirror for asya :lol:


Top
 Profile  
 
 Post subject:
PostPosted: March 13th, 2006, 13:24 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
Hi Yudi,

I don't really understand why it was necessary to copy-paste the other forum's conversations.
I asked you about your solution, not about how others could not solve problems.
but thanks anyway :)
and if your idea came from us, why is it too much to share?
maybe in PM.

pepe


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 172 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group