Hi guys, i have troubles with

WD800UE-00HCT0
DATE: 21 MAY 2005
DCM: HYNTJBNH

LBA 156301488

80.0 GB
---------------------

the problem is the hdd dont work , in the bios say
WD ROM MODEL-SCORPIO--
20.0GB
how to fix this error ?
-----------------------

i have run the MHDD, and in the detected info this:

WDC ROM MODEL-SCORPIO-- LBA: 39,070,081
SN: WDC-ROM SN# XYZ---- FW: 09.07D09 CACHE:2048KB Size = 19077MB

Init drive: [recal]

! ERROR: Drive not responding or operation canceled

--------------------

Any have idea how to fix this hdd?
how to rebuild the ID for correct this error?
or link to read how to

thanks guys.

Same Drive I got but 60 GB

Same Problem I face.

Can anybody know the solution ?

Use Pcek isa to chk modules and repair them . or check the SA for err

Don't have pc3000. Is there any OEM Firmware for this Drive.... ?

If drive not clicking, then drive has bad System Area
This is new WD drive with Marvell MCU, PC3000 for ISA cannot do it
only PC3000 for Windows can do
If you have not PC3000 for Windows - drop drive into garbage