Samsung SP0822N
August 8th, 2006, 10:28
Hy does anyone know some of ARM Samsung Technology?
This Hard Disk SP0822N ARM Microcontroller
when spindle up, begin to makes 8 knocks, then motor turn off and Send
LED 13 by Terminal.
Thanks for all u help
This Hard Disk SP0822N ARM Microcontroller
when spindle up, begin to makes 8 knocks, then motor turn off and Send
LED 13 by Terminal.
Thanks for all u help
Samsung SP0822
August 26th, 2006, 2:48
I also have 2 sp0822. they are both spin with knocs and then turn off the motor. any suggestion?
August 26th, 2006, 14:44
According to my experience , Samsung HDDs are the best choice for mid-end computers, reasonable price and very good manufacturing / quality standards. Anyway, we have seen that many SP0822 are prone to fail in such manner, suddenly and with no prediction (i.e. SMART thresholds) : the drive is operational, and after power off / on cycle knocks and then spin down.
I think this could either be a firmware issue (corruption of the loadable part of the software) or a head stack assembly / preamp failure but I am waiting to have some similar HDDs to make investigation (authopsy) for the failure.
Regards.
I think this could either be a firmware issue (corruption of the loadable part of the software) or a head stack assembly / preamp failure but I am waiting to have some similar HDDs to make investigation (authopsy) for the failure.
Regards.
but
August 27th, 2006, 0:22
This is the problem :Motor turn on and , Knock ´s 7 times then motor turn Off and Send This
UUSU
RS +001
PL
FGB77C
FG39C9
FG38EE
FG3808
[WE@F0=FF][WE@F4=FF][WE@F8=FF]Sb
LED 13
LED 13
LED 13
LED 13
LED 13
On next turn on send this
UUSU
RS +001
PL
FGB46C // only change this
FG3966
FG3885
FG37C2
[WE@F0=FF][WE@F4=FF][WE@F8=FF]Sb
LED 13
LED 13
LED 13
LED 13
LED 13
I dont know about ARM technology what could be happening im know if its head failure the most symptomp send some Like this on another architecture not ARM
SpnOk // this could be show Disk recalibrate
H+ 00000
1.1st Gray Error
UUSU
RS +001
PL
FGB77C
FG39C9
FG38EE
FG3808
[WE@F0=FF][WE@F4=FF][WE@F8=FF]Sb
LED 13
LED 13
LED 13
LED 13
LED 13
On next turn on send this
UUSU
RS +001
PL
FGB46C // only change this
FG3966
FG3885
FG37C2
[WE@F0=FF][WE@F4=FF][WE@F8=FF]Sb
LED 13
LED 13
LED 13
LED 13
LED 13
I dont know about ARM technology what could be happening im know if its head failure the most symptomp send some Like this on another architecture not ARM
SpnOk // this could be show Disk recalibrate
H+ 00000
1.1st Gray Error
August 28th, 2006, 16:07
Head.
pepe
pepe
September 1st, 2006, 2:32
Hi Pepe,
You said the problem is with the head. Do we need to change the head or is there a easier way to get data?
Thx
Baha Cevik
Istanbul - TURKEY
You said the problem is with the head. Do we need to change the head or is there a easier way to get data?
Thx
Baha Cevik
Istanbul - TURKEY
September 1st, 2006, 9:59
Hi,
It is easier to take it to a DR company
Apart from the joking, I don't see other choice than replacing the heads.
Or U may read the good parts and try to recover as much as possible from that one.
regards,
pepe
It is easier to take it to a DR company
Apart from the joking, I don't see other choice than replacing the heads.
Or U may read the good parts and try to recover as much as possible from that one.
regards,
pepe
September 3rd, 2006, 13:45
Hi Pepe,
Are You quote Head At Head Replacements ?
Are You quote Head At Head Replacements ?
September 4th, 2006, 5:31
Hi,
what do U mean, please?
pepe
what do U mean, please?
pepe
September 4th, 2006, 6:33
Hi sorry,
I Wanted To Ask You That Are You Now Quiet Good at Hard Disc Replacements
I Wanted To Ask You That Are You Now Quiet Good at Hard Disc Replacements
Powered by phpBB © phpBB Group.