View topic - PCB Board For Barracuda 7200.7 200GB

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

PCB Board For Barracuda 7200.7 200GB

Page 1 of 1

[ 7 posts ]

Previous topic | Next topic

Author

Message

DyWaN

Post subject: PCB Board For Barracuda 7200.7 200GB

Posted: March 8th, 2007, 5:31

Joined: March 8th, 2007, 2:56
Posts: 4
Location: Indonesia

Hi Friends,
my name is Andy from Indonesia. I'm looking for any seller that might have this following PCB board for my hard disk. Below is my drive's specifications:

Seagate Barracuda 7200.7
200 Gbytes (Parallel ATA)
Model : ST3200822A
P/N : 9W2844-301
HDA P/N : 100314751
Config : A5C-08
Firmware : 3.01
Site Code : TK
(Product of Thailand)

One component was burnt because of power failure. I'm pretty sure that the inside of the drive is ok (hopefully)

It's full of my families digital photos, will take ages for me to scan it one by one. Looking forward for replies...and thank you.

Cheers,
Andy

Top

gsimon

Post subject: .....

Posted: March 9th, 2007, 21:24

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia

which component?

Top

DyWaN

Post subject:

Posted: March 12th, 2007, 0:53

Joined: March 8th, 2007, 2:56
Posts: 4
Location: Indonesia

Hi gsimon,
thank you for your reply.
Actually I don't know what it is called. It's a small black "thing" with 2 connectors on it. Becam a bit ugly in shape (that's where the smoke came out). So I think I will need to replace the whole board. Do you have any idea where I can find it?

Top

pepe

Post subject:

Posted: March 12th, 2007, 4:15

Joined: October 3rd, 2005, 0:40
Posts: 4779
Location: Hungary

Hi,

that's probably the TVS, it become shorted by a power surge.
try desoldering it and power the drive afterwards to see if it works (probably it will).

pepe

Top

DyWaN

Post subject:

Posted: March 21st, 2007, 0:54

Joined: March 8th, 2007, 2:56
Posts: 4
Location: Indonesia

Hi pepe,
thank you for your reply. Can Iask you what TVS stans for? I'm not familiar with electronic components..Thanks in advance...

Top

pepe

Post subject:

Posted: March 21st, 2007, 13:08

Joined: October 3rd, 2005, 0:40
Posts: 4779
Location: Hungary

Hi,

Transient Voltage Suppressor.

Quote:

I'm not familiar with electronic components..Thanks in advance...

But in this case it might not be the best solution for you to touch the board...

pepe

Top

Herman p

Post subject: Re: PCB Board For Barracuda 7200.7 200GB

Posted: March 23rd, 2007, 12:37

Joined: January 2nd, 2006, 10:46
Posts: 9

DyWaN wrote:

It's full of my families digital photos, will take ages for me to scan it one by one. Looking forward for replies...and thank you.

Cheers,
Andy

Dear dyWan
Please contact me, PRSESAWI@YAHOO.COM. because i live In Indonesia

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Amra, Lukas and 60 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum