Seagate ST380011A , fw.3.06

Recognized in BIOS but data is being accessed, the head goes moving back and forth, but not clicking.

I suspect its the head problem but lets see what other hdd gurus opinions.

Thank you guys!!


Terminal:

Upon connected to terminal, this is what i get:

T>Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Head Mask 0000 - Switch to full int.
Spin Ready
3.06 10-21-03 15:53
(P)PATA Reset

CE Log EC=0 Rtype=36 OV=
AutoRd Err 43 at 00e497.00.008b

Read Ver Retrys
AutoRd Err 43 at 00e497.00.008b

Read Ver Retrys
AutoRd Err 43 at 00e497.00.008b

Read Ver Retrys
AutoRd Err 43 at 00e497.00.008b

Read Ver Retrys
AutoRd Err 43 at 00e497.00.008b

Read Ver Retrys

Read Ver Failure!
AutoRd Err 43 at 00e497.00.0097

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0097

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0097

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0097

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0097

Read Ver Retrys

Read Ver Failure!
AutoRd Err 43 at 00e497.00.0002

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0002

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0002

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0002

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0002

Read Ver Retrys
Read Ver Failure!

AutoRd Err 47 at 00e497.00.0002
AutoRd Err 47 at 00e497.00.0002
AutoRd Err 47 at 00e497.00.0002
Master
AutoRd Err 47 at 00e497.00.008b
AT Er 00 Nwt Er 37 RdWr 0018.00.0000
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 407031e1 ff 000031e1.4070.000 00db 0000 e6b0 0001
(to0F6BF,01234,F9A1,00,8A)$Switch to full int.

Switch to full int.
(to0F6BF,01234,F9A1,00,C7)AutoRd Err 15 at$ 000018.00.001c
Switch to full int.
Switch to full int.
(to0F6BF,01234,F9A1,00,C7)(to0F6C7,0123B,0000,00,93)
CE Log EC=16 Rtype=25 OV=0 $STStatus0
Switch to full int.
Switch to full int.
Switch to full int.
(to0F6C7,0123B,0000,00,C7)AutoRd Err 43 at 00e497.00.008b
AutoRd Err 43 at 00e497.00.0097
AutoRd Err 43 at 00e497.00.0118

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0118

Read Ver Retrys
AutoRd Err 43 at 00e497.00.0118

Read Ver Retrys
SCAN Error

=============================================

Pgm=00 Trk=043A6(043A6).0(1).119(118) Zn=2 Err=00 ErCt=0000 Hlth=0008 CHlth=0200
Ready LBA=0000001B

=============================================
Age=50 Type=21 MxCyl=16358 MxHd=1 MxSct=44C BSz=0000 TCode=0000

=============================================
Cmd Cyl Hd Sct Cnt Stbuf Segl Csct Cbuf Actv Ercd Rtry Flags
Sk 343A6 00 0100 0000 3200 8D 0119 0FFE N 00 9F75.2F.40 00

=============================================
? i get this
RD:0200:10
WR:0210:10
AC:022B:01FF
AS:042A:0065
SC:048F:0201
DP:022B:01FF
BA:0227:03
ST:022A:01
logbps:0200
codebps:0200

uP:0FE2:1E
FM:0220:07
AD:0220:0B
RL:0FDD
SL:0F1A
AL:0F03
MZ:0FF6

===========================================

ALPINE - 1_Disk 3.06 10-21-03 15:53
Built for ALPINE,GRAND2,Diamondback,TI1761 PreAmp,STL6 Andante PreAmp,InternalSp
in,GC110,SVC123AC,OneToOne,2Disk,LowDelta,220 Servos,7200RPM,8Pole,NonModGray,10
0MHz,Code DRAM,Early Exit,Stall Converter,RwFeat=0000,SeaDex,MDW

============================================
%
:5000000821000001 AX`5JV7N4ZW' "000000000000"0E46B-0E4EA
SRAM Ovly = AT

=============================================

T>x
Code - FB Track 143F2.1.240 Sns 000 Rty F7FF.FF.80FF Rtf 1800 LBA 00000
01B
==============================================

If its sending

T>

U can try to check it



Best Regards