It can not recognize by bios. Here is terminal log:

DiskAccess ReadSector EC=43 at ffffffff.00.0088
DiskAccess ReadSector EC=43 at ffffffff.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Failure!
Failed sys sect. write
AT Er 00 Nwt Er 37 RdWr 00018.00.0000
ATA St 50 Er 00 Op ec a,0000/0/00,00 00 00
Niwot: 0000261f ff 0000261f.9.af6 000d 0000 0000 4200
DiskAccess ReadSector EC=43 at 000018.00.0000
SCAN Error
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Failure!
Failed sys sect. write
AT Er 00 Nwt Er 37 RdWr 04e3e.00.03bc
ATA St 50 Er 00 Op ec a,0000/0/00,00 00 00
Niwot: 0000261f ff 0000261f.9.af6 000d 0000 0000 4200
DiskAccess ReadSector EC=43 at 004e3e.00.03bc
SCAN Error

--------------------------------------------------

Here is HDD ID log:

HDD parameters

CONFIGURATION GENERAL INFORMATION:
ATA device
Fixed device and/or controller

Logical cylinders count..................................... 16383
Logical sectors per track................................... 63
Logical heads count......................................... 16
Model....................................................... ST380819AS
Serial number............................................... 5MR69MS6
Firmware.................................................... 8.04

Maximal block size for READ/WRITE MULTIPLE commands......... 16

Features
Stop Timer Value
IORDY............................................. Supported
LBA Mode.......................................... Supported
DMA Mode.......................................... Supported

Current Logical Parameters
Cylinders......................................... 16 383
Heads............................................. 16
Sectors........................................... 63
Capacity.......................................... 16 514 064 Sectors (8 063.5 Mb)
Capacity available in LBA Mode.................... 156 250 000 Sectors (76 293.9 Mb)
Capacity available in LBA 48 Mode................. 156 250 000 Sectors (76 293.9 Mb)

Available DMA Mode
Multiword DMA Mode 0
Multiword DMA Mode 1
Multiword DMA Mode 2
Active DMA Mode............................................. Multiword DMA Mode 2

Active UDMA/33 modes
Ultra DMA/33 Mode 0
Ultra DMA/33 Mode 1
Ultra DMA/33 Mode 2
Ultra DMA/33 Mode 3
Ultra DMA/33 Mode 4
Ultra DMA/33 Mode 5
Ultra DMA/33 Mode 6
Current UDMA/33 mode........................................ [none]

Current PIO mode
Supported Enhanced PIO Modes
PIO MODE 3
PIO MODE 4

Minimal multiword DMA cycle time............................ 120 ns
Recommended multiword DMA cycle time........................ 120 ns
Minimal multiword PIO cycle time w/o stream control......... 240 ns
Minimal multiword PIO cycle time with IORDY................. 120 ns

Supported standards
ATA - 3
ATA - 4
ATA - 5
ATA - 6

Supported Command Sets
S.M.A.R.T functions
Security control

Security system............................................. Supported
condition flags :
password set...................................... NO
HDD Locked........................................ NO
HDD Frozen........................................ NO
wrong password count exceeded..................... NO
security erase support............................ NO
security level.................................... HIGH
Master code................................................. FFFE


thank for your time