Hello all hddguru people does any know remeber the old technology " Maxtor Quantum" D540X 4K04H2 now arrive one for Data Recovery , detected on BIOS by his manufacturer code GALAXY, and when try to access sectors show ERR ABRT , so im think SA problem , be able to read all modules, and this is the Road Map structure, does any one know, some about Quantum diskware ?

Thanks for all u help

Configuration params. table :
DisCache parameters :
Prefetch enable : No
Cache enable : No

Recovery errors parameters :
Automatic Write Reallocation Enabled : Yes
Automatic Read Reallocation : Yes
Read Continuous : No
Enable Early Correction : No
Disable Correction : No
Number of Retries : 8
ECC Correction Span : 32

HDD parameters :
Write Cache Enable : No
Reallocate Uncorrectable Error Enables : Yes

Configuration pages (Config Pages)
# CP# Length, bytes Condition
-------------------------------------
0 0 1 OK
1 1 2 OK
2 2 16 OK
3 3 16 OK
4 4 8 OK
5 5 12 OK
6 6 32 OK
7 7 72 OK
8 8 1 OK
9 9 16 OK
10 10 333 OK
11 11 4 OK
12 12 1 OK
13 13 2 OK
14 14 6 OK
15 15 166 OK
16 16 64 OK
17 17 7060 OK
18 18 2664 OK
19 19 64 OK
20 20 1 OK
21 21 4316 OK
22 22 1 OK
23 23 224 OK
24 24 96 OK
25 25 2082 OK
26 26 8 OK
27 27 1 OK
28 28 1 OK
29 29 1 OK
30 30 1 OK
31 31 1 OK
32 32 1 OK
33 33 1 OK
34 34 1 OK
35 35 2048 OK

CP 02
Page about manufacturer
QUANTUM

CP 03
Model name page
GALAXY 40

CP 04
Firmware version page
A08.156L

CP 05
Serial number page
000000000000

CP 07
Logical parameters page
Cyl: 425 Heads: 16 Sectors: 63

Detailed COM log : Yes

CP 08
Physical heads number page
Number of physical heads : 1

CP 10
Zone reallocation table page
# Beg. c. SPT0 SPT1 SPC
------------------------------
0 65506 400 400 400
1 0 574 574 574
2 1971 558 558 558
3 3121 543 543 543
4 4271 527 527 527
5 5421 520 520 520
6 6571 495 495 495
7 7721 478 478 478
8 8871 460 460 460
9 10021 442 442 442
10 11171 420 420 420
11 12321 400 400 400
12 13471 390 390 390
13 14621 362 362 362
14 15771 340 340 340
15 16921 317 317 317
Physical cylinders: 55222
Max LBA : -748862

CP 11
Max LBA stopper page
Max LBA: -1 (FFFFFFFFh)

CP 14
Heads control page
Amount of heads : 2
Utilized heads :
0 1

Road Map page
# ID Cyl Head Sec Length FamCod Rev Condition
----------------------------------------------------------
1 0E -9 0 0 1 44 A08 OK
-10 0 0 1 44 A08 OK
-11 0 0 1 DA U Chk S.ERR
-12 0 0 1 DA U Chk S.ERR

2 65 -9 0 1 2 44 A08 OK
-10 0 1 2 44 A08 OK
-11 0 1 2 FF Chk S.ERR
-12 0 1 2 FF Chk S.ERR

3 06 -9 0 3 2 44 A08 OK
-10 0 3 2 44 A08 OK
-11 0 3 2 FF Chk S.ERR
-12 0 3 2 FF Chk S.ERR

4 05 -9 0 5 1 44 A08 OK
-10 0 5 1 44 A08 OK
-11 0 5 1 FF Chk S.ERR
-12 0 5 1 FF Chk S.ERR

5 00 -9 0 6 4 44 A08 OK
-18 0 6 4 44 A08 Chk S.ERR

6 01 -9 0 10 74 44 A08 OK
-18 0 10 74 04 Chk S.ERR

7 02 -9 0 84 53 44 A08 OK
-18 0 84 53 0C ?0 Chk S.ERR

8 03 -9 0 137 4 44 A08 OK
-18 0 137 4 20 x [ Chk S.ERR

9 11 -9 0 141 10 44 A08 OK
-18 0 141 10 00 Chk S.ERR

10 12 -9 0 151 10 44 A08 OK
-18 0 151 10 42 a$ Chk S.ERR

11 13 -9 0 161 10 44 A08 OK
-18 0 161 10 FF Chk S.ERR

12 14 -9 0 171 10 44 A08 OK
-18 0 171 10 FF Chk S.ERR

13 15 -9 0 181 10 44 A08 OK
-18 0 181 10 FF Chk S.ERR

14 16 -9 0 191 10 44 A08 OK
-18 0 191 10 FF Chk S.ERR

15 17 -9 0 201 10 44 A08 OK
-18 0 201 10 FF Chk S.ERR

16 18 -9 0 211 10 44 A08 OK
-18 0 211 10 00 Chk S.ERR

17 19 -9 0 221 10 44 A08 OK
-18 0 221 10 00 Chk S.ERR

18 1A -9 0 231 10 44 A08 OK
-18 0 231 10 00 Chk S.ERR

19 61 -9 0 241 48 44 A08 OK
-18 0 241 48 00 Chk S.ERR

20 6B -9 0 289 9 44 A08 OK
-18 0 289 9 44 A08 OK
-23 0 6 9 44 A08 OK
-24 0 6 9 44 A08 OK

21 66 -9 0 298 18 44 A08 OK
-18 0 298 18 FF Chk S.ERR

22 62 -9 0 316 6 44 A08 OK
-18 0 316 6 FF  Chk S.ERR

23 07 -9 0 322 40 FF Chk S.ERR
-18 0 322 40 FF Chk S.ERR

24 08 -10 0 6 40 44 A08 Chk S.ERR
-19 0 6 40 44 A08 OK

25 09 -10 0 46 2 00 Chk S.ERR
-19 0 46 2 44 A08 OK

26 D7 -10 0 48 40 02 Chk S.ERR
-19 0 48 40 44 A08 OK

27 D9 -10 0 88 2 5D Chk S.ERR
-19 0 88 2 44 A08 OK

28 60 -10 0 90 120 A9 @ Chk S.ERR
-19 0 90 120 44 A08 OK

29 95 -10 0 210 6 00 Chk S.ERR
-19 0 210 6 44 A08 Chk S.ERR

30 96 -10 0 216 6 00 Chk S.ERR
-19 0 216 6 44 A08 Chk S.ERR

31 94 -10 0 222 31 00 Chk S.ERR
-19 0 222 31 00 OK

32 20 -10 0 253 45 05 o Chk S.ERR

33 23 -10 0 298 37 00 OK

34 24 -10 0 335 37 00 OK

35 25 -11 0 6 37 44 A08 Chk S.ERR

36 26 -11 0 43 37 AB a$ Chk S.ERR

37 27 -11 0 80 37 FF Chk S.ERR

38 28 -11 0 117 37 FF Chk S.ERR

39 29 -11 0 154 37 FF Chk S.ERR

40 2A -11 0 191 37 FF Chk S.ERR

41 2B -11 0 228 37 FF Chk S.ERR

42 2C -11 0 265 37 FF Chk S.ERR

43 2D -11 0 302 37 00 Chk S.ERR

44 2E -11 0 339 37 00 Chk S.ERR

45 2F -12 0 6 37 FF Chk S.ERR

46 54 -12 0 43 16 FF Chk S.ERR

47 55 -12 0 59 16 FF Chk S.ERR

48 56 -12 0 75 16 FF Chk S.ERR

49 30 -12 0 91 10 FF Chk S.ERR
-19 0 253 10 FF Chk S.ERR

50 E3 -12 0 101 6 FF Chk S.ERR
-19 0 263 6 FF Chk S.ERR

51 31 -12 0 107 24 FF Chk S.ERR
-19 0 269 24 FF Chk S.ERR

52 33 -12 0 131 16 FF Chk S.ERR
-19 0 293 16 FF Chk S.ERR

53 3E -12 0 147 5 FF Chk S.ERR
-19 0 309 5 FF Chk S.ERR

54 37 -12 0 152 6 FF Chk S.ERR
-19 0 314 6 FF Chk S.ERR

55 36 -12 0 158 32 FF Chk S.ERR
-19 0 320 32 FF Chk S.ERR

56 D3 -12 0 190 22 FF Chk S.ERR
-19 0 352 22 FF Chk S.ERR

57 34 -13 0 6 235 FF Chk S.ERR
-20 0 6 235 FF Chk S.ERR

58 3F -13 0 241 60 FF Chk S.ERR
-20 0 241 60 FF Chk S.ERR

59 4F -13 0 301 26 FF Chk S.ERR

60 42 -13 0 327 8 FF Chk S.ERR
-20 0 301 8 FF Chk S.ERR

61 40 -13 0 335 8 FF Chk S.ERR
-20 0 309 8 FF Chk S.ERR

62 5C -13 0 343 20 FF Chk S.ERR
-20 0 317 20 FF Chk S.ERR

63 49 -14 0 6 194 44 A08 Chk S.ERR
-21 0 6 194 FF Chk S.ERR

64 3D -14 0 200 8 FF Chk S.ERR
-21 0 200 8 FF Chk S.ERR

65 41 -14 0 208 6 FF Chk S.ERR
-21 0 208 6 FF Chk S.ERR

66 35 -14 0 214 4 06 $ F Chk S.ERR
-21 0 214 4 FF Chk S.ERR

67 22 -14 0 218 5 00 Chk S.ERR
-21 0 218 5 FF Chk S.ERR

68 32 -14 0 223 7 5E Chk S.ERR
-21 0 223 7 FF Chk S.ERR

69 47 -14 0 230 6 5C `` Chk S.ERR
-21 0 230 6 FF Chk S.ERR

70 4D -14 0 236 8 00 Chk S.ERR
-21 0 236 8 FF Chk S.ERR

71 4E -14 0 244 3 00 Chk S.ERR
-21 0 244 3 02 0n Chk S.ERR

72 4C -14 0 247 2 00 Chk S.ERR
-21 0 247 2 FF Chk S.ERR

73 93 -14 0 249 9 00 Chk S.ERR
-21 0 249 9 FF Chk S.ERR

74 21 -14 0 258 1 39 B Chk S.ERR

75 73 -14 0 259 2 39 _? Chk S.ERR
-21 0 258 2 FF Chk S.ERR

76 71 -14 0 261 2 44 A08 OK
-21 0 260 2 44 A08 OK

77 74 -14 0 263 2 44 A08 OK
-21 0 262 2 44 A08 OK

78 76 -14 0 265 2 38 60 Chk S.ERR
-21 0 264 2 FF Chk S.ERR

79 77 -14 0 267 33 D7 Chk S.ERR
-21 0 266 33 FF Chk S.ERR

80 C0 -14 0 300 1 00 ?= Chk S.ERR
-21 0 299 1 FF Chk S.ERR

81 C1 -14 0 301 1 87 @ & Chk S.ERR
-21 0 300 1 FF Chk S.ERR

82 C2 -14 0 302 1 3E Chk S.ERR
-21 0 301 1 FF Chk S.ERR

83 A3 -14 0 303 2 05 Chk S.ERR
-21 0 302 2 FF Chk S.ERR

84 A4 -14 0 305 2 36 4 Chk S.ERR
-21 0 304 2 44 A08 Chk S.ERR

85 A5 -14 0 307 2 00 Chk S.ERR
-21 0 306 2 FF Chk S.ERR

86 B1 -14 0 309 32 00 Chk S.ERR
-21 0 308 32 FF Chk S.ERR

87 B2 -14 0 341 32 71 _ Chk S.ERR

88 B3 -15 0 6 32 44 A08 OK

89 B4 -15 0 38 32 00 Chk S.ERR

90 B5 -15 0 70 32 FF Chk S.ERR

91 B6 -15 0 102 32 32 Chk S.ERR

92 B7 -15 0 134 32 FF Chk S.ERR

93 B8 -15 0 166 32 FF Chk S.ERR

94 B9 -15 0 198 32 00 Chk S.ERR

95 D5 -16 0 6 220 44 A08 Chk S.ERR

96 D6 -16 0 226 20 FF Chk S.ERR

97 BA -16 0 246 32 FF Chk S.ERR

98 BB -16 0 278 32 00 Chk S.ERR

99 BC -16 0 310 32 FF  Chk S.ERR

100 BD -16 0 342 32 FF Chk S.ERR

101 51 -16 0 374 10 01 9 Chk S.ERR
-21 0 340 10 FF Chk S.ERR

102 52 -17 0 6 24 FF Chk S.ERR
-21 0 350 24 FF Chk S.ERR

103 53 -17 0 30 1 FF Chk S.ERR
-21 0 374 1 01 9 Chk S.ERR

104 4B -17 0 31 32 FF Chk S.ERR
-22 0 6 32 FF Chk S.ERR

105 CE -17 0 63 2 FF Chk S.ERR
-22 0 38 2 FF Chk S.ERR

106 8C -17 0 65 74 FF Chk S.ERR
-22 0 40 74 FF Chk S.ERR


CP 15
Security control page
Master-passw. :
User-passw. :
Firmware :
Master-code : $0000
Security level: high

Hi,

H0 is bad. U need a head replacement.

Check the COM log, there should be something like HdMap02.
it should be HdMap03 for 40G models.
regards,
pepe

does it make any sound while initialization ?

No sound after recalibrate send DRDY DSC and i can heard the recalibration sound like a Good Maxtor D540X

did u try load LDR ?

Yes this was the process, on first, the HDD start i can heard the recalibration sound , then show DRDY DSC, but when try to access sectors show ERR ABRT, so im try to check SA, start with a loader, and was sucefull then read all SA, strange its im try to write the Same SA modules but show write errors ,

Hi,
Please believe me!
Or check it with a COM cable at least!

regards,
pepe