Corrupt ULIST Copy 1 & 2

[Deave]

I have a maxtor drive with corrupt ulist, both copy 1 and 2. My question is can a suitable replacement be copied from another drive or is it specific to the drive in question? I know it is specific to the configuration of the particular drive, ie. platters, heads, etc. The data is needed from this drive. Thanks.

[cryoborgofthevenus]

I have a maxtor drive with corrupt ulist, both copy 1 and 2. My question is can a suitable replacement be copied from another drive or is it specific to the drive in question? I know it is specific to the configuration of the particular drive, ie. platters, heads, etc. The data is needed from this drive. Thanks.

To be honest....this is nearly impossible...too difficult...

[pepe]

PM sent.
pepe

[Amarbir[CDR-Labs]]

Hi Pepe,
Why a PM Man ,share The Knowledge

[rameez]

are the copies damaged from the same place ? means on the same UBA .

[prodata]

it is not so difficult as cryoborgofthevenus say...
send PM friend..

I will help You...

Thanks

Sutiono / APING

[Starling]

There are actually 4 copies of UList...
But anyway, even if 2 of them are corrupted it's something more than a firmware corruption... And I'm not sure it's a good idea trying to rewrite them...
I would try smart hot swap first.

[pepe]

Amarbir

Pls let me be free to send a PM.
I don't like to assist the users of pirated stuff.
thx.
pepe

[rameez]

If the copies are not damaged from the same place u can overwrite these copies to one another it works good .

[Deave]

are the copies damaged from the same place ? means on the same UBA .

Hi Rameez. Yes, both copies were damaged in the same place so neither could be restored to the other.

[Deave]

Thanks for the feedback everyone. I ended up returning the drive back to the customer before resolving the issue. He was a bit impatient! Good to know for the next time. Thanks again.

[wawalab]

Ulist modules may be preserved in up to 8 copies. Only two of them are indicated in the module table. try to find another copy need some knowledge and tool.
good luck
wawalab

[Amarbir[CDR-Labs]]

Amarbir

Pls let me be free to send a PM.
I don't like to assist the users of pirated stuff.
thx.
pepe

Hi Pepe,
I Like everyone else Try To Find Whatever Tools Softwares Etc That I Can Lay My Hands On And How Come You Say "PIRATED STUFF" Have You Seen These At My Place .I Bet even You Search All Forums And Learn From The Same .I Can name So Many Expert People On the Forums That Are Active On Other Forums.So Next Time You Say So I Insist You Think Twice .Even My UDMA Is On The Way Now And don't Tell Me Its a Clone Again [they Still No Not Have em ] .Personally If You Do Not Want To Answer / Reply /Quote or Comment On My Queries And Suggestions .I Do Not Force You To Do the Same .I Am In the Learning Stage of DR And Like To Ask and Learn From Reading .

PS :I Mean No Insult To Anyone's Knowledge But even UDMa Original Support is For 1 Month In India And I Think You Agree that In 1 Month I Cannot Lean The Tricks of the Trade .

[pepe]

Hi,

Sorry. this answer wasn't pointed to U only. U know there are many guys using pirated stuff and this is an open forum.
I would be glad to meet U on ACElab's forum and talk about things related to using PC3k.
Sorry again if I was offensive.

kind regards,

pepe