Notification: Free Update of Maxtor Firmware Repairer

Dear Friends here,

SalvationDATA 2007 “Upgrade my Maxtor Firmware Repairer to HD Doctor for Maxtor for FREE” project has been launched. All customers who purchased our Maxtor Firmware Repairer before July 1, 2007 can upgrade it to our latest hardware-software combined solution HD Doctor for Maxtor free of charge by sending us an application.

For differences between the two version product,please go to:

http://www.salvationdata.com/article.asp?ai=117

How to update (only Two Steps):

Go to our website and fill out a form;
Pay the 50 Delivery Cost;

If you have any questions, please feel free to contact me!

Laura Lee

SalvationDATA

Hi Laura,
Salvation Quality is really increasing and can be used as a cheaper alternative to pc-3000 .I was wondering that why don'nt you have special offers for people who really participate on this website .Also i am wondersing whether you are going to release the hardware version for seagate firmware repairer also .That would be great .Also is there any research going on for other hard drives .

Amarbir wrote:Hi Laura,
Salvation Quality is really increasing and can be used as a cheaper alternative to pc-3000 .I was wondering that why don'nt you have special offers for people who really participate on this website .Also i am wondersing whether you are going to release the hardware version for seagate firmware repairer also .That would be great .Also is there any research going on for other hard drives .

Hi Amarbi,

Thank you for your concren about our First sale promotion since its foundation.

We have different promotion packs this time:

1) MT + WD=$800 (Save (490+490)-800=180 immediately)
2) MT + ST=$750 (save (490+450)-750=190 immediately)
3) MT + PDE=$600 (Save (490+400)-600=290 immediately)
4) MT+ST+WD=$1100 (Save (490+450+490)-1100=330 immediately)

We have a plan to update Seagate Repairer and add more functions into the product, run under Windows System.

The price is already low comparied with PC3K, so I can not offer any more discount for the friends on this forum.

However, If I can offer any help, please feel free to contact me!

Best Regards

Laura Lee

SalvationDATA

Hi Laura Lee,

PC3000 UDMA Version sells for about US$ 1 450.00 but only to CIS countries.

Also, please don't tell us about your plans - tell us when you got the update done and working.

Maybe then people can become more interested.

For me I never going to buy UDMA version - ACE pushed limit too far this time.

can you tell us what such function you added in Your New Update.
I think this point will be very important for others that like to purchase Salvation.

thanks

salvationlaura
Please make sure that your next "notification" complies with this:
http://forum.hddguru.com/free-update-to ... html#45342

Thanks

Maysoft ,
Agreed ,She Improved This Time

Hi Coffeebean ,

Can You Explain CIS Countries .They Sell That To Those Countries For USD 1450 And That Too UDMA .Is This With Or Without DE .And Salvation Lara Very Bad Discount Not Interested .WE Stay In Poor Countries Like India DR Jobs Not Too Great In Terms of Returns

maysoft wrote:salvationlaura
Please make sure that your next "notification" complies with this:
http://forum.hddguru.com/free-update-to ... html#45342

Thanks

Yes! Maysoft!

There are the new functions of the update of Maxtor.

Advantages of the “Upgrade my Maxtor Firmware Repairer to HD Doctor for Maxtor for FREE” project:

1. Free upgrade. Yes, you are right, you need not to pay a penny for the upgrade of software and the hardware. It is SalvationDATA who pays for your upgrade. You even do not need to send the Original Maxtor Firmware Repairer back. All you need to do is finishing the application form and send it back to us. (Foreign customers lived outside China Mainland will need to pay for the delivery cost of the software and hardware upgrade send to you via DHL). Unlike other companies in this field who charge their customers the price of the new product each time they release an upgrade, SalvationDATA provide totally free upgrade for its products, even there is hardware included.

2. More powerful capabilities and many additional efficient features. Compared with the Maxtor Firmware Repairer and other similar products which are more expensive, HD Doctor for Maxtor is much easier to use while provides you more powerful capabilities and features.

Key upgrades of HD Doctor for Maxtor:

1. Brand new program interface. No annoying DOS any more, from this version data recovery and drive repair of Maxtor series drives under Windows are available via USB device. Easily working on any desktop computer or laptop. Greatly improvement has been make to increase the success rate of data recovery, especially for 6Y/6E/6G/6H/6L/6V/7B

2. The most advantaged support list compared with all other similar products. From this version, 2B, 2F, 2R, 3X, 4D, 4G, 4R, 4W, 5X, 6B, 6E, 6G, 6H, 6L, 6V, 6Y, 7B, 8X, 9X (8X and 9X are old models of Maxtor).

3. Brand new read/write SA method added------PCHS (Physical Cylinder Head Sector), making your data recovery much easier.

4. New module definition function is added. There are functional explanations towards the modules in the module list both in the FW DOWNLOAD and FW DOWNLOAD menus. Enables you to get a general idea of the function of the modules before working on them.

5. New function of [Module Edit] for advanced users is added. Enables you to view or edit the module content directly in the program by a double-click on the module name on the module list in the [FW Download] menu.

6. New path definition for upload is added. There is a special option for defining the upload path in the FW UPLOAD menu now. Enables you to manage the download (save) and upload (write) more easily by separating the upload path and download path.

7. New firmware read/write method------by track, effectively avoid access deny because of defects in SA

8. Specially designed power voltage and current protection system. You can view the real-time voltage and current situation in graphic form during your data recovery and HDD refurbishment works.

9. Directly accessing the self-repair SA section (service area C section), easily activate selfscan to repair

10. Re-defining Primary HEAD, data recovery towards clicking(knocking) drive is easy now.

11. The SA Low-level Format, Defect Scan and Add U-List (defect list for storing SA bad sectors) functions. Enables you to repair bad sectors locate in SA (beginning sector, sector 0, reserved sectors).

12. Brand new design of BOOT function, more choices and more powerful functions. Making booting more easier for data recovery.

13. HEAD Position function. Manually make the head locate, you will find it very useful in data recovery

14. Improved selfscan, more powerful and better seflscan monitoring.

15. Rapidly read/write/verification towards the HD PCB ROM.

16. Brand new function P list records import. Data recovery towards P-list error or cleared drive becomes possible.

Thank you