MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: damaged MBR after virus scan/removal ?
PostPosted: July 16th, 2007, 17:49 
Offline

Joined: July 16th, 2007, 17:38
Posts: 2
Hi,

I know this question has been asked 1e5 times, but I don't really know
where to look. so quickly . . .

I've got a dtla 307020 that I ran a virus remover on Now I think the
MBR is messed up. I don't need the disk, but I'd like to get the data
off sooner rather than later.


questions:

AFAIK, the BIOS doesn't recognize the disc anymore; How can I be SURE
the bios isn't seeing the drive ? -maybe it's the MB on this (old
pc).

Actually I just ordered an external USB cabinet , based on the advice,
that the USB-computer interface is more tolerant than the IDE-computer
interface (I guess 'cause I"m not booting off it).



If the MBR is messed up, would the bios see it ?

Can PC software fix the MBR, if the BIOS isn't seeing the disc ?
If not, then I've got to get "some" hardware to see the disc.
What are my options?

Thanks,

SB


Top
 Profile  
 
 Post subject: Re: damaged MBR after virus scan/removal ?
PostPosted: July 17th, 2007, 4:40 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
If the BIOS isn't seeing the drive, then no regular software solution with work :-(

Sounds like something else has gone wrong?

Where are you based?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: damaged MBR after virus scan/removal ?
PostPosted: July 17th, 2007, 16:18 
Offline

Joined: July 16th, 2007, 17:38
Posts: 2
Boston.


Top
 Profile  
 
 Post subject: Re: damaged MBR after virus scan/removal ?
PostPosted: July 17th, 2007, 22:36 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
Do you hear any sound from the drive? Is it spinning on power on? Any clicking?
Are you sure you didn't mess with jumpers?
I suggest you try USB solution first and see how it works.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 73 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group