Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 18th, 2007, 3:29
Hello,
I have Seagate 7200.10 80GB; here is the terminal log, it cannot go to T> level
how to get to T> or F> levels ?
Thank you.
-----------------------------------------------------------------------
Reset
1024k x 16 DRAM
NHAWK - 1_Disk S-41 10-23-06_16:40
Buzz
Buzz
Buzz
July 18th, 2007, 4:05
Hi,
try with most powerfull PSU.
Regards
Samuil
July 18th, 2007, 16:06
Hi,
probably the spindle is seized or heads are stuck on the surface...
pepe
July 18th, 2007, 19:04
Spindle seizure is very popular on these models.
I guess the drive does not spin?
When u apply power, hold the drive in your hand. If you can feel slight movements, then it's more likely stiction, which is 100x easier to fix

IMHO of course
July 19th, 2007, 5:24
pcimage, you are right..
Thanks for all answers.
Powered by phpBB © phpBB Group.