MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: 1.8" Toshiba hard disk Pinout
PostPosted: September 27th, 2007, 6:41 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
I have uploded 1.8" Toshiba hard disk Pinout in datasheet section of files.hddguru.com. Very helpful.
Here is the link
http://files.hddguru.com/download/Datasheets/1.8%20%20hard%20disk%20datasheet/MK2004GALMK4004GAHTechnicalNotes-RevD.pdf

DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 27th, 2007, 23:06 
Offline
User avatar

Joined: October 6th, 2005, 3:00
Posts: 657
thanks you friend

_________________
Спасибо
СУТИОНО / АПИНГ


Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 28th, 2007, 1:07 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
You are welcome

DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 28th, 2007, 5:47 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Thanks, what's the purpose of this? What is a Pinout? Sorry but i'm still learning.


Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 28th, 2007, 6:01 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Pinout it the layout of all the pins; it describes where each pin is located and what it function is (what signal it carries).

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu


Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 28th, 2007, 10:57 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all.

I have an adapter of hdd 1.8"for IDE and perceived that they are equal to the connector of the CF, I can have access the CF with this adapter?
Or to have access hd 1.8"Of the READER OF CARD CF?
The bolts have the same function of the CF with HD 1,8"?
:?:


Attachments:
CF.JPG
CF.JPG [ 29.57 KiB | Viewed 10830 times ]

_________________
Нет ничего невозможного
Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 28th, 2007, 11:54 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Hi to all.

I have an adapter of hdd 1.8"for IDE and perceived that they are equal to the connector of the CF, I can have access the CF with this adapter?
Or to have access hd 1.8"Of the READER OF CARD CF?
The bolts have the same function of the CF with HD 1,8"?
:?:


Look for doc CF
http://www.compactflash.org/cfspc4_1.pdf

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: 1.8" Toshiba hard disk Pinout
PostPosted: September 29th, 2007, 13:51 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Hi Guys i just finished the same.

I had to check a ipod hdd 1.8" .I haver the same converter the left side is pin 44 and the right side is pin 1 .If the 1.8" drive holes point towards you make sure the totally round hole is in the right side and the hole which is elongated is on the left .Then just yank then together .Its Done

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group