MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
rgall0
 Post subject: Qustion from a noob
PostPosted: June 21st, 2007, 0:52 
Offline

Joined: June 21st, 2007, 0:43
Posts: 1
Ok my WD800UE crapped out on me so like a jack ass I through it in my home made clean room and opened it up but for some reason that eludes me at the moment and removed the top platter of the two.

I just found out about the servo thing and was wandering if the pc3000 and data extractor could read the data from the drive now that the top platter has been moved. I know the pc3000 is expensive but I'm one of those people that looks for an excuse to blow money on a new toy.

Thanks

-Ron
Top
 Profile  
 
cgallery
 Post subject:
PostPosted: June 21st, 2007, 1:27 
Offline

Joined: September 27th, 2005, 9:10
Posts: 220
No, once that platter was removed any chance of getting your data vanished.
Top
 Profile  
 
Steve
 Post subject:
PostPosted: June 21st, 2007, 1:31 
Offline

Joined: August 31st, 2006, 17:53
Posts: 354
Location: Birmingham, Al
Short Answer :
NO
Top
 Profile  
 
DataRecGuy
 Post subject:
PostPosted: June 21st, 2007, 9:10 
Offline

Joined: May 2nd, 2007, 10:31
Posts: 33
A pro could do it. ( I know I can )
Not with PC3000 but other ways....
Top
 Profile  
 
pcimage
 Post subject:
PostPosted: June 21st, 2007, 12:03 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
DataRecGuy:

You can recover from misaligned dual platters?

How?
Top
 Profile  
 
DataRecGuy
 Post subject:
PostPosted: June 21st, 2007, 16:59 
Offline

Joined: May 2nd, 2007, 10:31
Posts: 33
No servo needed.
just realign the platters.
Sorry I can tell you more, my company would not like that.
Top
 Profile  
 
hiljak
 Post subject: Re: Qustion from a noob
PostPosted: October 20th, 2007, 8:37 
Offline

Joined: June 21st, 2007, 21:03
Posts: 45
DataRecGuy wrote:
No servo needed.
just realign the platters.
Sorry I can tell you more, my company would not like that.


This is bullshit.. Sorry, I call your bluff. If this was true, you would be a billionare as your new customer would be US-DHS. What is the point of such lies?
Top
 Profile  
 
acforensics
 Post subject: Re: Qustion from a noob
PostPosted: October 20th, 2007, 22:31 
Offline

Joined: April 28th, 2007, 10:49
Posts: 160
I did it one time, but I used a marker to mark a notch on the top platter and the bottom platter. Seems difficult to do without knowing the alignment.

A
Top
 Profile  
 
rameez
 Post subject: Re: Qustion from a noob
PostPosted: October 21st, 2007, 5:31 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
If platters is misaligned it is impossible to restore it back to its orignal position .
Top
 Profile  
 
pepe
 Post subject: Re: Qustion from a noob
PostPosted: October 22nd, 2007, 14:12 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary
Hi,

I have also restored misalignment in for example an SP2014 drive...

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
hddguy
 Post subject: Re: Qustion from a noob
PostPosted: November 19th, 2007, 11:30 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
A toshiba I have had some good luck with when platters have been removed and misaligned. Never with a WD though...
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group