i want scripts for maxtor STM 3250310AS
and when i run all .dump , .dump2 and .dump48 for western digital
i get this error at last : No DRQ

please help me

I believe the password for the Maxtor/Seagate drive will be stored on the Vendor Track. You may like to read the following thread for ideas.

viewtopic.php?f=1&t=12920

_________________
A backup a day keeps DR away.

this is my 22.bin file when i ran the scripts in mhdd
but my hard is maxtor STM3250310AS
when i ran .dump .dump2 and .dump48
at last i get the error: No DRQ
what should i do?
this is my 22.bin after running it:

This dump is from a Western Digital drive, not a Maxtor/Seagate.

so what should i do?
fzabkar put a link for me, but i didn't find anything helpfull there
I'm so bored of searching and I cant find the way to unlock my hard
please help anybody me

well, i guess that there is a website where you can read download the software and connect your HDD and see if its supported or not, they will do it online but i dono how much u should pay for that
try it

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Use SeDiv to read the Vendor Track, assuming it supports your particular model.

Then someone may be able to analyse the data for you.

_________________
A backup a day keeps DR away.

ok
you just guess?
tell me the website

u will find it here if u spend some time searching , i posted it many times
look @ my posts about ur password issue

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

this is my log file from victoria 4.3 freeware beta version:


please help me to get the password
is this the correct file?

Now this is starting to get annoying........
The topic in this thread is Western Digital password removal. It has nothing to do with Maxtor or Seagate!
You have been given ideas how you might be able to diy the password so get on and do it or take it to a local recovery professional.
Oh and start your own thread instead of hijacking this one.
Search, read, then ask questions.

I suggest for this case to go to Seagate forum (on Seagate website) or call Seagate directly. I'm sure they will give all the answers.

I have a problem with running script .rm02 on WD5000avvs
I get the error "drive reports an error" and the script doesn't make no 22.bin file, could someone tell me what shall I do to succesfully run this script? i use mhdd 4.5 version, i have the cs.bin made in hex editor, i dont know what could failed?

_________________
Peter

Try one or more of the following utilities.

Utilities For Studying Service Area Of HDDs:
http://nazyura.hardw.net/000006.htm

_________________
A backup a day keeps DR away.

I used marvr_r as well as ZU and nothing helped .. maybe my mainboard chipset is not suitable? or i need an sata/ide adapter? does that matter?

The drive is correctly shown in BIOS, and in mhdd eid command displays as usual, security is set on, max

_________________
Peter

I can't answer your questions. You could try contacting the author:
http://nazyura.hardw.net/000007.htm

Alternatively, try configuring the SATA controller for legacy or compatibility mode in your BIOS setup.

_________________
A backup a day keeps DR away.

your in luck try WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD as MASTER password with security erase and you can unlock it "BUT YOUR / SOMEONES DATA WILL BE ERASED" "NO DATA"

_________________
All went well until I plugged the drive in.

LOL

guru, If I were in luck I would not write here for help Master password is changed by the shitty recorder hardware, so factory default master pass wont work (I tried desperatly in lack of other ideas, different lenghts, even putting in hex with victoria).
I see in this thread that someone has read his pass from wd5000avvs, but he doesnt replays private message, hope someone will help me. Pleas PM me with any clue
cheers
and respect for the gurus
Peter

_________________
Peter

http://www.hddunlock.com/drives/wd/

Your model isn't listed, but "HDD Unlock Wizard may support more drives than listed here. Please run HDD Unlock Wizard to find out whether your drive is supported — it's free ..."

Unlocking costs US$30.

_________________
A backup a day keeps DR away.