Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 27th, 2008, 14:28
Hi Guys,
after G6 (= read sector 6 from VENDOR CODE - right? in Terminal Mode /T)
what is the next right step (command) to display the buffer (data from sector 6)?.
I have only find some other info (/1 B20,200 and so on) but this work not for all Seagate Drives.
I will simple display this sector 6 from VENDOR-CODE ( Bxxx,xxxx or D xxx,xxx or other command ?).
I hope anybody can HELP me !
Best regards
Powered by phpBB © phpBB Group.