View topic - WDC 7500AAKS CHS and LBA Issue

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WDC 7500AAKS CHS and LBA Issue

Page 1 of 1

[ 7 posts ]

Previous topic | Next topic

Author

Message

Amarbir[CDR-Labs]

Post subject: WDC 7500AAKS CHS and LBA Issue

Posted: March 22nd, 2008, 10:05

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Mates ,

this One Is the strangest Case ,I Have Two WDC Drives when I Connect The Same To My Motherboard A ASUS A8N-E Via Sata One Will Always Initialise In CHS Mode and the Other One in LBA Mode.I Have Having a Issue That the Motherboard Halts When i Try To Access The CHS HDD The LBa Works Fine .Why Cannot My Board Detect That Perticular HDD as LBA

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

franckrules

Post subject: Re: WDC 7500AAKS CHS and LBA Issue

Posted: March 23rd, 2008, 2:04

Joined: January 20th, 2006, 22:36
Posts: 47
Location: Montreal

Amarbir,

Seems like a translator problem.

It can be rebuild with a PC3K from the P-List and G-list perhaps a bad translator would probably mean a defective Firmware cause by an overflow of bad sector so if you fix Translator you should not use this drive as a daily drive you should backup your data and replace it or Backup your data make a surface scan then move the G-List to P-List and reformat the drive.

Hope it helps

_________________
--
Francis Parent-Valiquette
http://www.tux-tech.ca/

Top

Amarbir[CDR-Labs]

Post subject: Re: WDC 7500AAKS CHS and LBA Issue

Posted: March 23rd, 2008, 2:27

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Nope ,
Something To Do With the Firmware Yes ,P And G Bad and Translator Issue Nope .Cos Both Are Brand NEw Drives But Purchased FRom diff People .The HDD Works Fine in diff Mboard Not The ASUS A8N-E :good:

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

harddrivespecialist

Post subject: Re: WDC 7500AAKS CHS and LBA Issue

Posted: March 23rd, 2008, 11:15

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA

U have a prob with ur mboard

_________________
www.datarecoveryne.com

Top

Amarbir[CDR-Labs]

Post subject: Re: WDC 7500AAKS CHS and LBA Issue

Posted: March 23rd, 2008, 15:24

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Correct ,
Can You Explain why the Other SAme Model WDC 7500AAKS Gets Detected As LBA And Not the first One .the Board Remains The Same ,Its a Damn funny Situation .

:mrgreen:

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

mr_spokk

Post subject: Re: WDC 7500AAKS CHS and LBA Issue

Posted: March 23rd, 2008, 18:00

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden

Hi, have you tryed to reflash your bios with a newer version....or set the default settings in bios?

Regards/ Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Top

Amarbir[CDR-Labs]

Post subject: Re: WDC 7500AAKS CHS and LBA Issue

Posted: March 23rd, 2008, 18:14

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

mr_spokk wrote:

Hi, have you tryed to reflash your bios with a newer version....or set the default settings in bios?

Regards/ Bosse

come guys you know me i am not a nerd ,Thanks For Reminder though ,Its Latest 1013

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum