Hi All,

I am currently looking for many PCBs for a PCB Swap on disks with burnt chips or other controller board faults. I have tried Ebay for weeks and several other sources. Found the same model but not other needed specs.

If you have any of these disks please let me know - i'll buy it and pay for shipping or if you prefer to loan it if you prefer let me know.

Disk #1 (My Reference #: 3235)
========================
Seagate Barracuda 7200.10
ST3320620AS
P/N: 9BJ14G-033
Firmware: 3.ADG

Disk #2 (My Reference #: 3136)
===========================
Maxtor DiamondMax21
STM3320620A
P/N: 9DP04G-326
Firmware: 3.AAE

Disk #3 (My Reference #: 3073)
========================
WD3000JD-98KLB0
DCM: DSBHCAJCH
Date: 06 OCT 2005

Disk #4 (My Reference #: 3150)
========================
Samsung SP2014N
P/N: 1231K1FYB83617
P/V: MS
REV: A

Disk #5 (My Reference #: 3158)
========================
Seagate ST3120213A
P/N: 9BD01C-302
Firmware: 3.AAD

Disk #6 (My Reference #: 3180)
========================
WD400BD-75JMC0
DCM: DSANTJCA
Date: 30 APR 2005

Disk #7 (My Reference #: 3221)
========================
Seagate ST3200820A
P/N: 9BJ03F-300
Firmware: 3.AAC

Disk #8 (My Reference #: 2934)
========================
WD1200JD-00HBB0
DCM: DSBACVJAH
DATE: 06 MAY 2005

Disk #9 (My Reference #: 3144)
========================
Seagate ST330621A
P/N: 9R4004-305
Firmware: 3.54

Disk #10
======
Maxtor 6L200P0041L11
Code: BAJ41G20


If you have any of these, please send me a Private Message. I am located in Australia. I have a Fedex account, i am happy to pay for shipping and a reasonable fee for the disk.

*fingers crossed*

Thank you.

Still searching for these PCBs, all of them - anybody have any of these?

I got a PCB for ST3320620A
With F/W 3.AAE
But P/N is 9BJ04G-305

Any good?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

I don't know, do you think the PCB will work on my drive?

I've got a Samsung SP2014N with same Rev & P/V but different P/N

_________________
http://www.datasaversllc.com

Thanks Jono-ats, i think i do need the exact matching "Rev & P/V" as far as i know.

I do have a match for Rev. & P/V. It's just the P/N that differs.

_________________
http://www.datasaversllc.com

Thanks for checking, i think i need both to match. Anybody else have any part i need?

Disk #5 (My Reference #: 3158)
========================
Seagate ST3120213A
P/N: 9BD01C-302
Firmware: 3.AAD

_________________
Knowledge is more important than money!!!

Arkadas Bilgisayar
Data Recovery Services
Istanbul / TURKEY
http://www.datakurtarma.com

Disk #9 (My Reference #: 3144)
========================
Seagate ST330621A
P/N: 9R4004-305
Firmware: 3.54

I have pcb for this drive .

As long as we are on the topic, I'm looking for a PCB as well, and haven't been having any luck with ebay and such.

Maxtor 6Y080L042B411
Code: YAR41KW0

Haven't had any luck, hope someone out there can help.

Can u give the number of the CPU in ur processor like Agere Ardent C8 - C1 .