MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
acforensics
 Post subject: Toshiba MK6026GAS
PostPosted: June 18th, 2008, 23:07 
Offline

Joined: April 28th, 2007, 10:49
Posts: 160
Hi Guys,

This Toshiba hdd first did not spin up at all, no busy register - nothing. So I repaired the fuse. Now it goes busy, then all status registers go on. Anyone seen this before?

I know the adaptives are held on the processor. Am I screwed if it won't boot?

Thanks,

A
Top
 Profile  
 
beto
 Post subject: Re: Toshiba MK6026GAS
PostPosted: June 19th, 2008, 8:54 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
u can unsolder ROM and put on a Donnor PCB, could be another damaged on the PCB, if u PCB doesnt has serial ROM, u need to unsolder ARM chip and soldered on donnor

Best Regards
Top
 Profile  
 
pcimage
 Post subject: Re: Toshiba MK6026GAS
PostPosted: June 19th, 2008, 9:00 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Silly question, but have you set the CS jumper on PC3000?

And tried on a regular PC?

Sean

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
acforensics
 Post subject: Re: Toshiba MK6026GAS
PostPosted: June 19th, 2008, 9:55 
Offline

Joined: April 28th, 2007, 10:49
Posts: 160
Thanks Beto and Sean. I think it was a jumper issue. I fired it up in DeepSpar and it took off.

Cheers!

A
Top
 Profile  
 
pcimage
 Post subject: Re: Toshiba MK6026GAS
PostPosted: June 19th, 2008, 14:47 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
:-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
beto
 Post subject: Re: Toshiba MK6026GAS
PostPosted: June 20th, 2008, 10:05 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
great acforensic,

best regards
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group